Light Head Information: The WAL-TSL-500LTL-LED spotlight tower uses the Larson Electronics GAU-LTL-500W-LED LED Flood Light head which offers intense light output and is ideal for security and outdoor lighting applications. Producing 60,000 lumens, a 4 amp draw at 120V, 80,000 hour service life, 120-277 volt compatibility, and IP67 waterproof rating, this LED flood light provides operators with a rugged and powerful LED alternative to 1500 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions.
The GAU-LTL-500W-LED LED light head produces 60,000 lumens of high intensity light while drawing only 480 watts at 4 amps from a 120 volt electrical system. Fourty-Eight CREE® high output LEDs producing 1,250 lumens each are arranged in rows and paired with PMMA high purity optics to produce a tightly focused 10° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area.
GAU-LTL-500W-LED lights are ideal replacements for fragile and hot running 1500 watt metal halide lamps. They offer low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications.
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
Cree Specific: This lamp uses Cree LED units that have been chosen for their high lumen per watt ratio and extreme longevity. These Cree LEDs generate a robust 120 lumens per watt effective lumen output and have a 70% lumen retention at 80,000 hours, giving them better efficiency and operational life than traditional light sources.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.
Durability: As well as unparalleled heat control, the GAU-LTL-500W-LED series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The CREE® LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.
Click Photos to Enlarge|
5-15 Straight Blade Plug
15 Amp / 125V Rated
L5-15 Twist Lock Plug
15 Amp / 125V Rated
L6-15 Twist Lock Plug|
15 Amp / 250V Rated
UK BS1363 Straight Blade Plug
13 Amp / 250V Rated / Internal Fuse
Intl Schuko 2-Pin Plug
16 Amp / 250V Rated / Grounded
Flying Leads / Pigtail Wires|
Wiring/Plug: This LED security spotlight tower is equipped with 25 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.
Voltage: The WAL-TSL-500LTL-LED is available in voltages between 120-277V AC, 50/60Hz to fit specific power requirements.
Tower/Mounting: The WAL-TSL-500LTL-LED is mounted on a three foot tall aluminum pole. The pole features a round base with four pre-drilled holes for permanent mounting to any flat surface. The pole and mounting base are powder coated for durability and finished in glossy blue. The aluminum mounting pole also includes two hooks for cable management.
The WAL-TSL-500LTL-LED has an aluminum reflector mounted around the light head that allows the unit to project a beam up to 2300` feet in length for security and corrections applications. Two rear-mounted handles allow the operator to direct the spotlight both horizontally and vertically with the ability to rotate a full 360 degrees for effective search light use to smoothly guide the light through a full range of motion in order to track moving objects on the ground. With the included reflector, this LED security light tower stands approximately 4.5` tall. Combined with the rugged finish of the tower and the IP67 waterproof rating of the light head the WAL-TSL-500LTL-LED offers operators a durable and reliable light that will last for years.
At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message firstname.lastname@example.org for more information about our custom options tailored to meet your specific industry needs.
|Made in USA Quality
||Superior LED Benefits|
1. Each unit dialectrically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Rear-mounted handles allow operators to smoothly guide the light both horizontally and vertically.
3. Housing constructed from die cast aluminum.
4. High quality PMMA optics lend to enhanced lighting output.
5. Aluminum reflector allows the light head to project a search light beam up to 2300` in length.
6. Mounting base includes four pre-drilled holes for permanent surface mounting.
7. Light head produces 60,000 lumens while drawing only 480 watts.
1. 80,000 hour lifespan.
2. Can SAVE 50% or more on energy.
3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.
4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LEED and other sustainable business certifications.
9. Bright, even light maintains consistent color over time.
10. Instant on/off - No flickering, delays or buzzing.
11. Very good color rendering.
12. Vibration/impact resistant.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.
15. California Title 24 Compliant
Specifications / Additional Information
|WAL-TSL-500LTL-LED Security Tower Light
-Scroll Down to Purchase-
|Light Head Specs:
||Ideal for Security and Corrections Applications|
|Lamp Type: CREE® LED
||1000 Watt Metal Halide Replacement|
|Dimensions: 22.92"-L x 14.51"-W x 5.153"-D
||Ambient Op Temp -40C to +80C|
|Weight: 56.81 Lbs
||Ideal for Light Towers & LED Retrofits|
|Total Watts: 480
||98% Transmission High Purity PMMA Optics|
|Total Lumens: 60,000
||Multiple LED Banks for Heat Dispersion|
|Luminous Efficiency: 125 lm/w
||120 Lumens Per Watt Efficiency|
|LED Color Temperature: Cool White - 5500-6500K
|LED Life Expectancy: 80,000 hours
|Optics Efficiency: 98% - PMMA High Transmittance Optics
|Led Drive %: 90%
||IP67 Rated Waterproof|
|Amp Draw: 4A @ 120V, 2A @ 240V, 1.74A @ 277V
||Light Weight Aluminum Construction |
|Lighting Configuration: Spot Pattern
||70% Lumen Retention after 80,000 Hours |
|Ambient Operating Temperature: -40°C to +80°C
|Wiring: 25` SOOW Cord - General Area Cord Cap
|Cord Cap Options: 5-15 Straight, 6-15 Straight, L5-15 Twist, L6-15 Twist, UK BS1363, Intl. Schuko, Pigtail
|Mounting Pole: 3` Permanent Mount Aluminum Pole
|Reflector Material: Aluminum
||Special Orders- Requirements|
|Rotation: Full 360° Rotation
||Contact us for special requirements |
|Mounting: Round Base Plate w/ 4 Predrilled Holes for Permanent Surface Mounting
||Toll Free: 1-800-369-6671|
|Materials: Die Cast Aluminum
|Weight: 90 lbs