Made in Texas
The EPL-24-2L-PT-12V-SOL Explosion Proof Solar Power LED light fixture w/ pole mount bracket from Larson Electronics is an ideal lighting solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. Charged by a 30-watt solar panel, four 8aH sealed lead acid batteries provide constant, reliable power to the two 28-watt LED fixtures. This unit ships with 30’ of 16/2 SOOW cord, connecting the solar panel to the light fixture which allows operators to position the panel where the most ambient light is available. When ordering the solar powered luminary, please select the preferred light handling mechanism.
This explosion proof fixture features 2-foot long LED tubes in a dual, side-by-side lighting configuration. Powering the LED lamps are four, 8aH sealed lead acid batteries. These power packs are contained within the solar panel (not the light) and offer up to 7 hours of continuous operation on a full charge with a 5-hour charge time. To ensure consistent operation during nighttime conditions, a built-in day/night photocell, coupled with an on/off switch is available. This fixture ships with 30 feet of 16/2 SOOW cord that connects the light fixture to the solar panel.
As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on cloudy days, the unit will not recharge as quickly. The day/night sensor is programmed to activate the solar panel in the evening and shut off during the day. An on/off switch activates/shuts off the solar panel according to the operator`s preferences. The operator can switch between modes with a toggle switch.
Durability: The EPL-24-2L-PT-12V-SOL features our second generation LED T-series 14-watt, T17 style lamps which produce 15% more illumination at 8 feet, compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels. We have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight, creates a slimmer unit profile, and helps this LED fixture maintain a T6 temperature rating. The solid state design of the LED lamps gives this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs.
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. Solid state LED lighting is also safer for the environment as LEDs are 100% recyclable. And recycling simultaneously reduces operating costs by eliminating the need for the expensive special disposal services required with traditional gas burning and arc type lamps.
Mounting: The EPL-24-2L-LV-SOL comes with a pole top mounting bracket.
Applications: Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants and remote hazardous locations compatible with the unit.
NOTE: Larson Electronics has further upgraded the options available with this light. We expect the light to be mounted separately from the panel. This means the solar panel can be mounted in direct sunlight (not in the hazardous area) while the light is mounted in a hazardous area workspace. Standard installation for explosion proof lighting, including threaded rigid pipe to the LED light fixture and appropriate seal-offs, etc. are required.
Larson Electronics offers a Class I, Division 2 rated panel solution for an additional cost. This incorporates a class rated panel, charge controller, and sealed battery solution. This allows the panel to be installed within C1D2 environments. No C1D1 rated solar panels exist, so the panel must be located outside the C1D1 environment in either panel solution offered.
At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message firstname.lastname@example.org for more information about our custom options tailored to meet your specific industry needs.