The Larson Electronics
MGL25-8C-480-240.120V-1X50A-1X30A-6X20A Temporary Power Distribution System
converts 480 VAC three phase electrical current to single phase 120V AC and 240V
AC 60hz. This power distribution system provides operators the ability to safely
tap into and distribute 480VAC power from a variety of sources including
generators and direct grid power. This portable substation is suitable for
outdoor applications with a fully potted transformer and Nema 3R load center.
This power distribution system is configured to transform 480V 3 phase to
120/240 Delta, so up to 5% of the capacity (1250 watts) can be used for lighting
loads as well.
*PLEASE NOTE: ANY FREE SHIPPING
OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR
MGL25-8C-480-240.120V-1X50A-1X30A-6X20A temporary power distribution system
provides a safe and reliable way for operators in industrial settings to tap
into and utilize power sources independently of the work area. This unit
provides an effective power distribution system for operators performing plant
turnarounds, maintenance and cleaning in hazardous areas, equipment
installations and repairs, and any activities requiring an alternative to native
power sources. This portable transformer is designed to operate with 480v, three
phase, 60hz which it then steps down to 1ph 120 VAC and 1ph 240 VAC. The power
distribution system on this portable substation makes 120VAC available via six
20amp, 120v GFCI protected duplex receptacles and 240 VAC available via one
30amp, 250v, twist lock receptacles.
MGL25-8C-480-240.120V-1X50A-1X30A-6X20A portable power distribution substation
converts three phase, 480 VAC electrical current to single phase 120V AC and
240V AC via a 25kva transformer (480v to 120/240v, 1ph, 60hz). 20ft of 6/4 SOOW
line in power cord is included to connect the substation to a primary 480v
3ph primary power supply. A fused disconnect, main on/off switch provides
primary line protection and supplies primary power to the 25kva transformer.
This power distribution system conforms to UL 1640.
Secondary current is wired to a
120/240v, 1 phase, 100 amp load center with main breaker for circuit protection.
120/240 line out protection is provided by six 20amp, 125 Volt, 1 pole breakers
and two 30amp, 250v, 2 pole breakers. Connection for 120-240VAC is through
receptacles mounted on the side of the substation. Receptacles include six
20amp, 120v, GFCI waterproof duplex receptacles and two 30amp, 250v receptacles.
The load center is mounted within Nema 3R enclosure for protection against
accidental contact, rain, dust, splashing water, and sprayed water.
transformer and load center/distribution assembly is mounted to a standard steel
cart style frame resulting in an extremely stable, durable, and mobile power
distribution platform. Two rubber tires and a cart style mounting platform
provides easier substation mobility, and a center point lift eye allows easy
lifting with cable or chain hooks. This temporary power distribution solution
can be modified to meet the needs of job-site receptacle requirements. Units are
available up to 150kva and can be equipped with skids or trailer
power distribution system is NEMA 3R rated and ideal for indoor/outdoor use and
applications including but not limited to; construction sites, plant
maintenance, plant turnarounds, hazardous location operations, shows, exhibits,
and shipyard operations. These temporary power distribution systems are
popularly used for HAZLOC applications where external power sources are often
necessary and work well in combination with explosion proof lights and
Electronics is a manufacturer and as such can build portable transformer systems
to your specifications. Although we carry several models of power distribution
transformers, we can deliver custom ordered units almost as quickly as our
prebuilt units. If this model does not meet your needs, please contact us at
1-800-369-6671 or firstname.lastname@example.org to discuss
your specific requirements.
Specifications / Additional
|MGL25-8C-480-240.120V-1X50A-1X30A-6X20A Temporary Power
Scroll Down to
|Line In: 20` 6/4 SOOW
||UL 1640 Portable Power-Distribution Equipment|
|Primary Voltage: 3-Phase, 480 VAC 60Hz
||NEMA 3R Indoor or Outdoor Use|
60 amp 480v, 3ph, Fused
||Made in the USA|
(6) 120V GFCI Outlets w/ 6 Breakers, (2) 250V Outlets w/2 Breakers, 100 amp Main
Load Center with Breaker
|Output- 1 Ph 120V
Outlets: (6) 20 Amp Waterproof GFCI Protected
|Output- 1 Ph 240V
Outlets: (1) 50amp & (1) 30amp 250v, Twist Lock
120/240v, 1phase, 100 amp Single Main Breaker- NEMA 3R Enclosure
Powder Coated Steel Dolly Cart w/ Run Flat Tires
||Contact us for special requirements |
W-40" X D-40" X H-48"
||Toll Free: 1-800-369-6671|
|Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram.||*All grounding shall comply with state and local codes and meet
the minimum requirements of the National Electronic Code section