Made in Texas
The Larson Electronics WALSB-480V.120V-8X20A-2X30A portable power distribution converts 480V AC 50/60 Hz input voltage and steps it down to 120V AC output voltage. This weatherproof portable power distribution unit allows operators to plug into 480V generators and welding outlets via an L22-20P cord cap.
The WALSB-480V.120V-8X20A-2X30A portable spider box from Larson Electronics is built to provide operators with a reliable source of low voltage 120V power. This compact spider box is designed for portability and convenience as well as durability. Featuring an elevated base platform for protection from standing water and weatherproof construction, the WALSB-480V.120V-8X20A-2X30A is ideal for powering 120V equipment and lighting in construction, entertainment, job-site, marine, and outdoor locations where 480V generators are providing the power.
This portable spider box features eight 120V, 20A GFCI 5-20R duplex receptacles and two 120V, 30A, L5-30R receptacles that provide sealed and secure connections for up to 10 devices. The maximum voltage for all 10 receptacles is 1500W. In addition, the receptacles provide 120V for powering high voltage lighting and equipment without the need for running additional extension cords. Each receptacle features a hinged watertight cover protecting the face from rain, water, and moisture when not in use. The WALSB-480V.120V-8X20A-2X30A power distribution unit features short circuit and overload protection. In the instance of circuit overload, the unit automatically shuts down to protect the spider box from damage and restarts after 30 seconds.
The housing on the WALSB-480V.120V-8X20A-2X30A is constructed from powder coated steel with a NEMA 3R enclosure rating. The angled base and low center of gravity ensure this low voltage transform does not tip over when in the field. The entire unit is powder coated with glossy blue finish for corrosion resistances and aesthetics.
The WALSB-480V.120V-8X20A-2X30A portable spider box system converts primary 480V AC into 120V AC primary voltage, which is brought in via 20` of 12/4 chemical and abrasion resistant SOOW cable that is fitted with an industrial grade male L22-20P cord cap to the breaker enclosure equipped with a 40-amp, 2-pole breaker. Secondary voltage is distributed via the eight 120V, 20A GFCI 5-20R duplex receptacles and two 120V, 30A, L5-30R receptacles.
Larson Electronics is a manufacturer and as such can build transformers to your specifications. Although we carry several models of power distribution systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or firstname.lastname@example.org.
Specifications / Additional Information
Scroll Down to Purchase
|Primary Voltage: 480V AC 50/60 Hz
|Line-In Cable: 10` 12/4 SOOW Cable w/ Cord Cap
||NEMA 3R Weatherproof|
|Line-In Cord Cap: Industrial Grade L22-20P
|Transformer: 5KVA 480 to 120V N3R
|Secondary Voltage: 120V AC
||Special Orders- Requirements|
|Secondary Receptacles: (8) 120V 20A GFCI 5-20R Duplex and (2)120V 30A L5-30R Receptacles
||Contact us for special requirements |
|Secondary Protection: GFCI, Breaker Enclosure w/ 40A 2P Breaker
|Dimensions: 15"L x 9.5"W x 24"H
||Toll Free: 1-800-369-6671|
|Weight: 50 lbs
|Mounting: Portable / Base Stand
|Larson Electronics manufacture a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram.
||*All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250*|