The Larson Electronics
EPLC2-HB-100LED-RT-UVA Explosion Proof Ultraviolet light fixture provides
operators with a powerful and energy efficient alternative to traditional
hazardous location luminaries with UV cutoff filters. LED technology and compact
design makes this lamp an excellent replacement upgrade option for bulky and
high maintenance cost older incandescent, metal halide and high pressure sodium
lights. This fixture uses advanced LED light technology to produce ultraviolet
light and is T6 rated for hazardous locations where UV lamps are used in paint
and adhesive curing, food inspection or for non-destructive
Class 1 Division 2, Class 2 Division 1 & 2 explosion proof UV light fixture
provides 35,000 mW of high quality ultraviolet light while drawing only 100
watts. This high output UV LED fixture provides a 4,800 µW/cm2 center beam
maximum intensity at 12" while providing a minumum 2,000 µW/cm2 intensity over a
14" by 14" area. The EPLC2-HB-100LED-RT-UVA is typically used for curing
coatings or adhesives and for non-destructive testing applications. This fixture
has been thoroughly tested with the DuPont line of ultraviolet curable paint and
primers, excellerating the cure times over metal halide fixtures with surface
temperatures as low at 55°F.
copper free aluminum alloy body is powder coated for added durability and an
attractive aesthetic appearance. Special heat dissipating design in conjunction
with LED technology helps this fixture to achieve an excellent 50,000 hour rated
lifespan with 80% intensity retention. Light weight and a low profile make this
unit an attractive alternative to larger and heavier older fixtures and requires
less hardware to install. This fixture can operate on voltages ranging from
120V-277V 50/60Hz and is ETL approved for use in hazardous environments, paint
spray booths, wet environments, and areas where UV lamps are used in paint and
adhesive curing, food inspection, and for non-destructive
Click Photo to
Click Photo to
Click Photo to
explosion proof LED light fixture features multiple LED drivers which helps to
increase the operational life of the fixture. With traditional LED lights, in
the event an LED array or driver fails, the entire fixture no longer
illuminates. This new series of LED lamps contains twelve individual LED boards
configured in a series of banks. Each bank contains two LED boards with an
individual driver. In the event of a driver failure, only one bank of LEDs will
be effected while the other banks will continue to operate. In the event that of
an LED failure, the mating LED will continue to operate.
EPLC2-HB-100LED-RT-UVA uses ultraviolet LED light technology, a technology that
is far better in energy saving than traditional fluorescent bulbs used for
the same purposes. Traditional ultraviolet lights require a coating to block out
visible light or a special composition of gases and chemicals used to create a
higher concentration of ultraviolet light. This process, however, also
produces many other wavelengths of light which go unused and end up as wasted
energy. LED lights are unique in that they have a narrower wavelength band than
traditional ultraviolet sources and therefore do not require these special
coatings. As a result, LED lights do not produce unused, wasted light and
therefore consume less energy than traditional UV lights on the market. LED
lights have the added benefit of being capable of producing very specific
wavelengths with tighter curves and are more durable and light weight as well.
This eliminates harmful UV-B and UV-C wavelengths from being emitted from the
light source, adding in productivity and safety during operation.
Unlike gas burning and arc type
lamps that have glass bulbs, LEDs have no filaments or fragile housings to break
during operation. Instead of heating a small filament or using a combination of
gases to produce light, light emitting diodes (LEDs) use semi-conductive
materials that illuminate when electric current applied and emitting light. With
LED lights, there is no warm up time or cool down time before re-Striking and
provide instant illumination when powered on, adding to the reliability of LED
technology. By nature, LED light sources run significantly cooler than
traditional lamps, reducing the chance of accidental burns and increased
temperatures due to heat emissions. This solid state design of light emitting
diodes provides a more reliable, stable, durable, and energy efficient light
source over traditional lighting.
Draw @ 120V AC
Draw @ 24V DC
|Operation Cost per Year (8hs/day @
Class 1, Division 2 LED ultraviolet light fixture can be used for
non-destructive testing in aviation and manufacturing, food processing and
inspection, and in paint, coating, and adhesive curing. The
EPLC2-HB-100LED-RT-UVA provides operators in hazardous locations with a reliable
and durable UV lighting solution that combines effective production of UV light
with explosion proof protection and is applicable for leak detection, paint
spray booths, ink, coatings, and adhesive curing, non-destructive testing,
inspection, and food processing.
light is universal voltage capable and can be operated with 100-277 VAC,
50/60Hz. We also offer a low voltage version of this LED fixture that operates
on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is
IP67 rated, dust-proof, and protected against high pressure jets and temporary
submersion. The cast aluminum body and LED lamp give this light excellent
durability and resistance to vibration and impacts. The housing is specially
designed to dissipate heat which increases the efficiency and lifespan of the
LEDs and electronics.
Click Photo to
LED light produces 35,000 mW with a wavelength curve of 350-380NM.
µW/cm2 center point irradiation at 2` away from lamp.
1,298 µW/cm2 center
point irradiation at 3` away from lamp.
775.5 µW/cm2 center point irradiation
at 4` away from lamp.
550 µW/cm2 center point irradiation at 5` away
440 µW/cm2 center point irradiation at 6` away from
302 µW/cm2 center point irradiation at 7` away from
EPLC2-HB-100LED-RT-UVA offers several mounting options including ceiling
mounting, pendant mounting, wall mounting and cable mounting. The standard
version of this explosion proof LED fixture includes a pendant mount and a
surface mount option.
1. Low power consumption.
3. Fixture constructed of extruded corrosion resistant
copper free aluminum alloy.
4. Superior color rendering compared to HPS, LPS,
5. Retains 80% intensity output after 50,000 operating hours.
Powder coated aluminum fixture body.
7. Pendant and Swivel Bracket mount
8. Low profile - Light weight
9. 35,000 mW output from 100
10. 4,800 µW/cm2 center beam maximum intensity & minumum 2,000
µW/cm2 intensity covering a 14" x 14" area when measured at
1. 50,000 hour lifespan.
2. Can SAVE 50% or
more on energy.
3. Qualifies retrofit projects for financial incentives,
including utility rebates, tax credits and energy loan programs.
energy use and prolongs life-Spans of peripheral cooling units (A/C,
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV
light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LED
and other sustainable business certifications.
9. Bright, even light
maintains consistent color over time.
10. Instant on/off – No flickering,
delays or buzzing.
11. Very good color rendering.
13. Significantly cooler operation.
14. Less frequent outages,
higher output improves workplace
Specifications / Additional
C1D1 Ultraviolet LED Light
Scroll Down to
States - Canada
||Listed for United States and Canada|
||Class I, Divisions 2, Groups C and
14"H x 16"W 5"D
||Class II, Divisions 1 & 2, Groups E,F,G|
||Class III, Divisions 1 & 2|
|Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC
||Certified to UL 844 Ed. 13|
||Certified to UL 1598|
|Total Intensity: 35,000 mW
||Certified to C22.2 No. 137 Rev 2009|
|Efficiency: 350 mW/w
||Certified to C22.2 No. 250.0|
|Lamp Life: 50,000+ Hours
||Certified to C22.2 No. 30-M-1986 Rev 2012|
||T5 Temperature Rating|
|Wavelength Curve: 350-400NM - Peak @ 365NM
||Paint Spray Booth Approved|
||IEC 60529 Tested|
|Power Efficiency: >95%
||IP67 Rated Waterproof|
|Power Factor: 0.992
||Multiple Driver Banks|
|Ambient Operating Temp
Range:-50° C to +65°C
||80% Intensity Retention after 50,000 Hours|
||Factory Sealed Light Fixture|
|Housing Material: Copper Free Cast Aluminum
||Recommended 15` to 40` Mounting Height|
|Housing Finish: Epoxy Powder
Coated - Grey
|Lens Material: Hardened
||Contact us for special requirements|
3/4” Pendant & Swivel Mount - Both Ship w/ Fixture
||Toll Free: 1-800-369-6671|
16/3 SOOW w/ Flying Leads