The Larson Electronics EPS-10HP-3PST Explosion Proof 3-Pole Starter Switch is listed Class I, Divisions 1 & 2 and Class II, Divisions 1 & 2 to provides a safe and secure method for operators to use with contractors and single or three phase AC or DC motors and control for motors and equipment in hazardous locations.
This explosion proof starter switch is ideal for operators seeking a high quality explosion proof starter switch rated for use in hazardous areas designated Class 1 Division 1 and Class 2 Division 1. This explosion proof switch is rated for 10 HP at 380-575V AC, and 7.5 HP at 200-230V AC. The entire unit is constructed of malleable iron and contains an internal sealing chamber constructed of copper free aluminum. This unit is easily wall mounted via integral mounting tabs at top and bottom corners of the enclosure.
This unit is rated to handle electrical loads of 200-230V AC or 380-575V AC up to 10 horsepower and is suitable for use in environments where combustible dusts and particulates may be present.
The EPS-10HP-3PST explosion proof starter switch cover and housing box is constructed of malleable iron with all arcing devices contained within an explosion proof enclosure. The entire unit is triple coated with zinc electroplate, chromate, and a final epoxy powder coat for maximum durability and corrosion resistance. Each hub opening is fitted with an integral bushing to prevent fraying or damage to insulation. Two sets of external mounting lugs provide simple and secure mounting of the unit to walls and flat surfaces. The unit box, switch, and face plate are all included with the product.
Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Lighting, Wet areas or Locations Where Combustible Dust is Present.
Specifications / Additional Information
|EPS-10HP-3PST Explosion Proof Starter Switch
||Certifications - Compliance|
Scroll Down to Purchase-
|Switch Voltage Rating: 200-230V or 380--575V AC
||Listed for United States & Canada|
|Switch Horsepower Rating: 7.5HP @ 200-230V, 10 HP @ 380-575V
||Class I, Division 1 & 2, Groups C & D|
|Grounding: Single Internal Housing Ground
||Class II, Division 1 & 2, Groups E, F & G|
|Configuration: Front Switch
|Switch Type: AC/DC Single or Polyphase Starter Switch
|Number of Poles: Three
||CAN/CSA C22.2, No. 14, C22.2 No.25, & C22 No. 30|
|Protection: Quick power disconnect to motor, under voltage protection, circuit protection, and motor running protection
||NEMA 3, 3R, 7CD|
|Enclosure Configuration: NEMA 1
|Unit Materials: Box/Receptacle- Malleable Iron, Sealing Chamber-Aluminum
||Special Orders- Requirements|
|Finish: Triple-coat - Zinc Electroplate, Chromate, Epoxy powder coat
||Contact us for special requirements |
|Mounting: External Mounting Lugs on Body
||Toll Free: 1-800-369-6671|