Made in the USA
The Larson Electronics EPL-PT-100LED-RT-480V Pole Top Slip Fitter LED light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. This explosion proof slip fitter operates on 347-480V AC.
This Class 1 Division 1 & 2, Class 2 Division 1 & 2 pole top slip fit mount explosion proof light fixture provides 11,667 lumens of high quality light while drawing only 100 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.
The EPL-PT-100LED-RT-480V pole top slip fit mount explosion proof light features an adjustable swivel bracket constructed of 3/8" aluminum that allows 270° of adjustment and is attached to a slip fit yoke for easy installation. The slip fit yoke is built to customer`s specs, enabling operators to mount this explosion proof LED light to their specific pole size. The wiring of the EPL-PT-100LED-RT-480V is terminated in a junction box with 3/4" threaded hub. Operators can run rigid pipe or flexible conduit to the junction box, terminating the electrical connections within.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge|
The explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains eight individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-Striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
The aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 11,667 lumens with a color temperature of 5000K, 4000K, or 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The lamp is T5 temperature rated, Design Lights Consortium approved, and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps.
|Energy Consumption Comparison|
|Amp Draw @ 120V AC
|Amp Draw @ 220V AC
|Amp Draw @ 240V AC
|Amp Draw @ 277V AC
|Amp Draw @ 12V DC
|Amp Draw @ 24V DC
|Lamp Life Expectancy
|Operation cost per year
(12hs/day @ 12c/kWh)
The EPL-PT-100LED-RT-480V yoke mount explosion proof LED flood light is universal voltage capable and can be operated with 347-480 VAC without modifications. 347V is common in Western Canada, while 480V is common in the United States and Eastern Canada. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.
The entire assembly is ETL listed Class 1, Divisions 1-2 and Class 2, Divisions 1-2 for use in hazardous locations and approved for paint spray booths. The extreme durability, universal voltage capabilities, and LED longevity make this LED flood lighting system an ideal fit for frac pads, rigs, offshore, and any application that requires a Class 1 Division 1 pole top light fixture.
Mounting Notes: The EPL-PT-100LED-RT-480V pole top slip fit mount explosion proof light features an adjustable swivel bracket constructed of 3/8" aluminum that allows over 270° of adjustment and is attached to a slip fit yoke for easy installation. The slip fit yoke is built to customer`s specs, enabling operators to mount this explosion proof LED light to their specific pole size. For example, selecting a 2" OD mount means that the yoke mount will fit onto pipes or bull horns with a 2" OD.
|High Quality Features
||Superior LED Benefits|
1. Low power consumption.
2. Instant on/off operation.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.
4. Superior color rendering compared to HPS, LPS, MV.
5. Retains 80% lumen output after 60,000 operating hours.
6. Powder coated aluminum fixture body.
7. Slip fit yoke mount for easy installation.
8. Low profile - Light weight
9. 11,667 Lumen output from only 100 watts
10. 347-480V AC Universal Voltage
|1. 60,000 hour lifespan.|
2. Can SAVE 50% or more on energy.
3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.
4. Reduces energy use and prolongs life-Spans of peripheral cooling units (A/C, refrigeration)
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LEED and other sustainable business certifications.
9. Bright, even light maintains consistent color over time.
10. Instant on/off – No flickering, delays or buzzing.
11. Very good color rendering.
12. Vibration/impact resistant.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.
Specifications / Additional Information
|EPL-PT-100LED-RT-480V Pole Top Slip Fit Mount
Scroll Down to Purchase-
|Listing: United States - Canada
||Listed for United States and Canada|
|Lamp Type: Cree LED
||Class I, Divisions 1 & 2, Groups C and D|
Dimensions: 16"-W x 22"-H x 18"-D
|Class II, Divisions 1 & 2, Groups E,F,G|
|Weight: 42 lbs
||Class III, Divisions 1 & 2|
|Voltage: 347-480V AC
||Certified to UL 844 Ed. 13|
|Total Watts: 100W
||Certified to UL 1598|
|Total Lumens: 11,667
||Certified to C22.2 No. 137 Rev 2009|
|Luminous Efficiency: 116.67 Lm/W
||Certified to C22.2 No. 250.0|
|Lamp Life: 60,000+ Hours
||Certified to C22.2 No. 30-M-1986 Rev 2012|
|Color Temp: 5000K, 4000K, 3000K
||T5 Temperature Rating|
|Color Rendering Index: >75 CRI
||Paint Spray Booth Approved|
|Beam Angle: 60° or 125°
||IEC 60529 Tested|
|Lighting Configuration: Flood Pattern
||IP67 Rated Waterproof|
|Power Efficiency: >95%
||IP67 Rated Waterproof|
|Power Factor: 0.992
||Multiple Driver Banks|
|Ambient Operating Temp Range:-50° C to +65°C
||80% Lumen Retention after 60,000 Hours|
|Operating Temp Rating: T5
||Factory Sealed Light Fixture|
|Lamp Housing Material: Copper Free Cast Aluminum
||Recommended 10` to 30` Mounting Height|
|Lens Material: Hardened Borosilicate Glass
||120-277V AC or 11-25V AC/DC|
|Mount Material: Non-Sparking Aluminum w/ SS Hardware
||Adjustable Swiveling Pole Top Mount|
|Gasket Material: Silicone
||Multiple Slip Fit Yoke Diameters Available|
|Mounting: Slip Fit Yoke Mount w/ Adjustable Bracket
|Yoke Diameter: 1.5", 2", 2-1/4", 2-1/2", 2-3/4", 3" Slip Fit
|Wiring: Flying Leads inside Junction Box
|Wiring Hub: 3/4" NPT
|LED Driver Specs
|Input Voltage: 100-277 Volts AC
||Special Orders- Requirements|
|Input Current: 1.8A Max
||Contact us for special requirements |
|Output Voltage: 54V Max
||Toll Free: 1-800-369-6671|
|Output Current: 2.1A
|Output Current: 2.1A