Made in the USA
The Larson Electronics EPL-48-2L-LED-VISUV Explosion Proof Visible/Ultraviolet LED Light Fixture is United States and Canada approved Class 1 Division 1 & 2 and Class 2 Division 1 and 2 for areas where flammable chemical/petrochemical vapors exist or have the potential to exist. This explosion proof LED light features one visible white LED lamp and one 365NM ultraviolet light for combined visible and UV applications such as paint booths, oil rigs, offshore applications, petrochemical, manufacturing, chemical storage, water treatment centers, and food processing plants.
This four foot, two lamp combination visible/ultraviolet LED fixture is ideal for operators seeking a top quality explosion proof light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The EPL-48-2L-LED-VISUV is equipped with Larson Electronics’ specially designed LED T-series bulbs which produce 3,500 lumens of visible white light and 19,200 mW of ultraviolet intensity. Each lamp has individual leads to be powered separately. Our LED series bulbs are visibly brighter than standard T8`s and have consistently surprised many of our customers with their unexpectedly high light output levels.
This fixture carries a T6 temperature rating and is approved for Class I Division 1, Groups C and D, Class I, Division 2, Group A, B, C and D, and Class II, Division 1 and 2, Groups E, F and G environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist. This LED linear fixture is approved for use in confined spaces. Click here to read the NEC description for explosion proof and hazardous locations.
|Click Photo to Enlarge ||Click Photo to Enlarge |
| || |
The included LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. These LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. The visible white LED lamp is offered in 5600K cool white, 4500K natural white, and 3000K warm white. Our standard unit ships with 5600K unless different color temperature is specified.
Unlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.
Our EPL-48-2L-LED-VISUV LED light fixture is U.S. and Canada approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementations.
Mounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.
Adjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.
Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.
Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, chemical manufacturing, waste treatment plants, gas processing plants.
|Made in USA Quality||Superior LED Benefits|
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy
4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for re-lamping the fixture, while some competitive models require the “tap and knock off” method to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.
1. 50,000 hour lifespan.
2. Can SAVE 50% or more on energy.
3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.
4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LEED and other sustainable business certifications.
9. Bright, even light maintains consistent color over time.
10. Instant on/off – No flickering, delays or buzzing.
11. Very good color rendering.
12. Vibration/impact resistant.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.
|Specifications / Additional Information|
|EPL-48-2L-LED-VISUV Explosion Proof LED Fixture ||Ratings/Approvals|
Scroll Down to Purchase-
|Listing: United States - Canada||Class 1 Division 1, Groups C and D T6|
|Dimensions: W-11.25" x L-52" x H-8.5 "||Class 1 Division 2, Group A,B,C,D|
|Weight: 55 Lbs. ||Class 2, Division 1 & 2, Groups E,F,G|
|Voltage: Universal 120-277VAC 50/60 Hz or 12-24V DC||UL 595 Marine Type (Saltwater)|
|Total Watts: 61.5 watts ||UL 844|
|Total Lumens: 3,500 ||UL 1598 Marine Type|
|Total UV Intensity: 19,200 mW||Certified Canadian Standards|
|LED Lamp Life Expectancy: 50,000+ Hours||Listed for Paint Spray Booths|
|Color Temp: 5600K, 4500K, 3000K (Visible) and 365NM (UV)||California Title 24 Compliant|
|Color Rendering Index: >80||IP67 Rated - Waterproof|
|Beam Angle: 150°||T6 Temperature Rating|
|Power Efficiency: 90%||NEMA 4X|
|Power Factor: >0.95||LEL Listed LED Lamps|
|Ambient Operating Temp Range:-30° C to +85°C||Approved for Confined Spaces|
|Operating Temp Rating: T6 Rated||Silicone Free|
|Minimum Operating Temp: -30°C||Factory Sealed Fixture|
|Maximum Case Temp: +90°C||Made in the USA|
|Housing Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free|
|Lens Material: Hardened Borosilicate Glass Tubes|
|Gasket Material: Buna Rubber O-Rings||Special Orders- Requirements|
|Mounting: Surface Standard - Pendant Optional||Contact us for special requirements|
|Wiring Hub: 1/2" NPT||Toll Free: 1-800-369-6671|
|Warranty: 5 Years*||Intl: 1-903-498-3363|
|U.L Approval: U.S Certificate Canada Certificate||E-mail: email@example.com|
| || |