Links will open in new windows.
Explosion Proof Lights:
Our line of explosion proof lights and explosion
proof LED lights represent the best in high quality explosion proof
View More Information
We carry an extensived line of LED lights
including LED light bars, explosion proof LEDs, LED lights for military
applications, boats, vehicles, security lighting and more.
Infrared LED Lights:
Infrared LED light emitters for covert
applications. Larson Electronics Infrared LED emitters are ideal for military
and security applications where a covert source of infrared light is
View More Information
We carry the full line of Golight remote
controlled spotlights and related accessories. Larson Electronics is the only
source for the Golight Stryker Remote Control Spotlight with magnetic
View More Information
Larson Electronics stocks a comprehensive line
of hunting lights and related accessories. Our hunting lights include
rechargeable handheld LED spotlights and HID spotlights with red
Our HML series of spotlights have been tested
and approved for use by the Marines, Army, Navy, and Air Force and are part of
the military’s Special Forces' Escalation of Force Kits.
View More Information
24 Volt Lights:
Larson Electronics manufactures and stocks
an extensive line of 24 volt
lighting equipment that ranges from 12/24 volt spotlights and floodlights to
multimillion candlepower searchlights and industrial grade work
View More Information
Magnalite or Larson Electronics
Larson Electronics is a
manufacturer and distributor of industrial-commercial grade lighting products.
Larson Electronics carries an extensive line of lighting products including
explosion proof lights, hazardous location lights, explosion proof paint spray booth lights, high power LED lights, remote control HID Golight spotlights, LED flashlights,
infrared LEDs, LED
boat lights and industrial light towers. Larson
Electronics also manufactures and distributes a wide range of HID high power spotlights and HID flashlights that
are ideal for use as military spotlights
and law enforcement searchlights as well as effective for use in the utility and emergency services
Larson Electronics products that
are particularly well suited to military and law enforcement applications include
police lights, unity post mount spotlights, unity roof mount lights, remote control Golight spotlights, remote control spotlights with magnetic bases, rechargeable spotlights, rechargeable flashlights, led flashlights,
high intensity discharge military spotlights with magnetic
bases and magnetic tripods for
flashlights and spotlights. Larson Electronics manufactures and carries an
extensive line of military spotlights, floodlights, and military grade lighting accessories and
Many of Larson Electronicss
lighting products can serve equally well in the public and private sector as
camping lights, off-road and ATV lights, and infared security lights; this includes a wide array of LED lights and
LED light bars that
can operate on a variety of voltages ranging from 9 to 42 VDC and can be mounted
on cars, trucks, boats and
Larson Electronics is a large
distributor of the Golight line of remote controlled spotlights and stocks
a comprehensive variety of HID or high intensity discharge Golights, Golight marine spotlights and searchlights, Golight floodlights,
military Golights and
a wide array of camouflage Golights
for hunting and off-road use. Larson Electronics is the only source for the
Golight Stryker Remote Control Spotlight with magnetic
base and offers a wide variety of mounting
options for both the Golight Stryker and
Golight RadioRay series of spotlights.
Larson Electronics develops and stocks
a wide range of explosion proof lights and products as well as intrinsically safe lights and intrinsically safe LED lights. Larson Electronics’s explosion proof line of lights carry the required
explosion proof certifications and approvals and are U.L. certified for use in
hazardous locations according to their respective class, division and zone
ratings. Larson Electronicss hazardous location lighting includes explosion proof fluorescent lights for paint spray booths, Class 1 Div 1 flashlights and intrinsically safe lights, portable and cart mounted tank lights, explosion proof droplights, explosion proof LED lights and intrinsically safe flashlights.
Larson Electronics regularly
develops and manufactures new additions to its line of explosion proof lighting and industrial grade lighting products and is proud to offer the latest
in explosion proof LED lighting and explosion proof paint spray booth lighting. Larson Electronics also manufactures a wide array of
military and law enforcement related accessories including the concealable, back
up universal handcuff key (plastic handcuff key)
used by Air Force pilots, Navy SPAWAR, Navy Seals and Special Operations
military personnel to effect escape in hostage or prisoner
If you have any questions or
special requirements regarding any of our industrial grade lighting solutions
please contact us by E-mail at firstname.lastname@example.org You can also call us toll free at 1-800-369-6671.
Purchase orders can be faxed to us at 903-498-3364 Larson
Electronics can provide detailed technical information regarding any of its
products and is capable of working with customers to create unique lighting
solutions to suit their needs and requirements.
Larson Electronics manufactures the
Larson Electronics 12 volt spotlights with magnetic base and 12 volt searchlights with magnetic base with magnetic bases and 16 foot cords in Dallas, TX. These
industrial grade 12 volt spotlights
have been a staple of the cable, telephone and electric utility industry since
1967. Larson Electronics has since its beginnings expanded this to include the
military/law enforcement industries, federal and local governments, and emergency and first responder industries as well.
We carry a complete line of
HID off road and HID
equipment lights, including the Acro Light line.
HID flood lights with
permanent and magnetic mount options work on 12 and 24 volt DC systems and
provide illumination that extends 250 feet. The permanent mount and magnetic
mount HID spotlights project a beam to 3000 feet.
Larson Electronics is a manufacturer
and as such we maintain a large available inventory of our magnetic mount
spotlights, HID spotlights. HID flashlights and
the Golight Stryker and Golight Radioray remote controlled spotlights, battery
operated flashing strobe lights, LED flashlights and
LED headlamps. Because of our extensive inventory and "make to order" capacity,
nearly all orders for spotlights and flashlights received before 4 PM CT are
shipped same day via UPS.
Many of our professional grade
spotlights and flashlights make excellent gifts for him or gifts for men. Remote
controlled spotlights with magnetic base, military spotlights, handheld
spotlights, vehicle mount spotlights, rechargeable spotlights, rechargeable flashlights, hunting spotlights, hunting searchlights
and state of the art hid flashlights all
make fine christmas gifts for men, and are sure to please even the most
discriminating friends and family.
Larson Electronics' Larson Electronics
can also be viewed in these languages - Arabic Spanish Japanese Italian Portuguese Russian French.
Contact us at sales@magnalight
.com or call us toll free at 1-800-369-6671 for mor
information regarding any of our products. Purchase orders can be faxed to us at
903-498-3364 Larson Electronics can provide detailed technical
information regarding any of its products and is capable of working with
customers to create unique lighting solutions to suit their needs and
Larson Electronics Links
Follow Larson Electronics on
Ceiling Mount Explosion Proof 150 Watt High Bay LED Light Fixture - Paint Spray Booth Approved
Part # EPL-HB-150LED-RT-CM Price:
Hoja de Especificaciones
The Larson Electronics
EPL-HB-150LED-RT-CM Ceiling Mount Explosion Proof High Bay light fixture
provides operators with a powerful and energy efficient alternative to
traditional hazardous location luminaries. Cree LED technology and compact
design makes this lamp an excellent replacement upgrade option for bulky and
high maintenance cost older incandescent, metal halide and high pressure
Class 1 Division 1 & 2, Class 2 Division 1 & 2 explosion proof
light fixture provides 17,500 of high quality light while drawing only 150
watts. The copper free aluminum alloy body is powder coated for added durability
and an attractive aesthetic appearance. Special heat dissipating design in
conjunction with LED technology helps this fixture to achieve an excellent
60,000 hour rated lifespan with 80% lumen retention. Light weight and a low
profile make this unit an attractive alternative to larger and heavier older
fixtures and requires less hardware to install.
explosion proof LED light fixture features multiple LED drivers which helps to
increase the operational life of the fixture. With traditional LED lights, in
the event an LED array or driver fails, the entire fixture no longer
illuminates. This new series of LED lamps contains twelve individual LED boards
configured in a series of banks. Each bank contains two LED boards with an
individual driver. In the event of a driver failure, only one bank of LEDs will
be effected while the other banks will continue to operate. In the event that of
an LED failure, the mating LED will continue to operate.
Unlike gas burning and arc type
lamps that have glass bulbs, LEDs have no filaments or fragile housings to break
during operation. Instead of heating a small filament or using a combination of
gases to produce light, light emitting diodes (LEDs) use semi-conductive
materials that illuminate when electric current is applied and emit light. With
LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED
technology. By nature, LED light sources run significantly cooler than
traditional lamps, reducing the chance of accidental burns and increased
temperatures due to heat emissions. This solid state design of light emitting
diodes provides a more reliable, stable, durable, and energy efficient light
source over traditional lighting.
light is universal voltage capable and can be operated with 100-277 VAC,
50/60Hz. We also offer a low voltage version of this LED fixture that operates
on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is
IP67 rated, dust-proof, and protected against high pressure jets and temporary
submersion. The cast aluminum body and LED lamp give this light excellent
durability and resistance to vibration and impacts. The housing is specially
designed to dissipate heat which increases the efficiency and lifespan of the
LEDs and electronics.
LED light produces 17,500 lumens with a color temperature of 5000K and
a color rendering index of 75 which produces colors and details much more
accurately than high pressure sodium or mercury vapor luminaries. We also offer
a 3000K warm white and 4000K natural white color temperature options (longer
lead times may apply for non-standard temperatures). The EPL-HB-150LED-RT-CM
offers several mounting options including ceiling mounting, pendant mounting,
wall mounting and cable mounting. The standard version of this explosion proof
LED fixture includes a flat surface ceiling mount with four 3/4" NPT entries.
1. Low power consumption.
3. Fixture constructed of extruded corrosion resistant
copper free aluminum alloy.
4. Superior color rendering compared to HPS, LPS,
5. Retains 80% lumen output after 60,000 operating hours.
coated aluminum fixture body.
7. Ceiling mount included w/ 3/4" knock
8. Low profile - Light weight
9. 17,500 Lumen output from 150
1. 60,000 hour lifespan.
2. Can SAVE 50% or
more on energy.
3. Qualifies retrofit projects for financial incentives,
including utility rebates, tax credits and energy loan programs.
energy use and prolongs life-spans of peripheral cooling units (A/C,
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV
light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LED
and other sustainable business certifications.
9. Bright, even light
maintains consistent color over time.
10. Instant on/off – No flickering,
delays or buzzing.
11. Very good color rendering.
13. Significantly cooler operation.
14. Less frequent outages,
higher output improves workplace
Specifications / Additional
|EPL-HB-150LED-RT-CM - C1D1
High Bay LED Light
Scroll Down to
States - Canada
||Listed for United States and Canada|
||Class I, Divisions 1 & 2, Groups C and
14"H x 16"W x 11"D
||Class II, Divisions 1 & 2, Groups E,F,G|
||Class III, Divisions 1 & 2|
|Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC
||ATEX EX II 3G Exd IIB T5 Ga|
||ATEX EX II 3D Exd IIA T5 Da|
|Total Lumens: 17,500
||Certified to UL 844 Ed. 13|
||Certified to UL 1598|
|Lamp Life: 60,000+ Hours
||Certified to C22.2 No. 137 Rev 2009|
5000K, 4000K, 3000K
||Certified to C22.2 No. 250.0|
Index: >75 CRI
||Certified to ATEX 94/9/EC|
60° or 125°
||T5 Temperature Rating|
||Paint Spray Booth Approved|
|Power Efficiency: >95%
||IEC 60529 Tested|
|Power Factor: 0.992
||IP67 Rated Waterproof|
|Ambient Operating Temp
Range:-50° C to +65°C
||Multiple Driver Banks|
|Housing Material: Copper Free Cast Aluminum
||80% Lumen Retention after 60,000 Hours|
|Lens Material: Hardened
||Factory Sealed Light Fixture|
||Recommended 15' to 40' Mounting Height|
Ceiling Mount Junction Box
3/4" NPT Hubs on Ceiling Mount
|Input Voltage: 100-277 Volts AC
||Contact us for special requirements|
|Input Current: 1.8A Max
||Toll Free: 1-800-369-6671|
|Output Voltage: 54V Max
|Output Current: 2.1A
9.42 / 10
20069 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
How Much Light is Enough Light
Lighting choices vary, depending on the needs of the applicable location and personal preferences of individuals in the area. A “one size fits all” solution is rarely available when determining the lighting requirements of multiple environments. For example, lighting configurations for an office may differ, compared to a packaging warehouse. Even if the two facilities were the same size, the type of work being carried out in the buildings dictate the properties or characteristics [...]
Understanding Explosion Proof Lighting Classes Divisions and Groups
The concept of explosion proof light ratings can be confusing to understand. Hazardous workplace conditions can vary greatly and that means that a comprehensive rating system becomes necessary in order to ensure a safe work environment. [...]
Lumen vs Foot-Candles – Which Is More Accurate for Measuring Illumination?
When a customer is looking for lights, the most common question posed is “how bright is this light?” As lighting technology improves, the standard measurements of illumination aren’t always the most accurate in calculating a light’s output. Understanding how each rating is determined will help you choose the best fixture for an application. [...]
Paint Spray Booth Lighting: Why Use Third Party Booths?
In order for a spray booth to be truly effective however, it must have the correct lighting. While at first glance booth lighting might not seem like such an involved subject, a closer look at just what constitutes effective spray booth light reveals a different and more complex appearance. Booth lighting is critical because it directly affects the ability of the operator to apply a quality finish. Good lighting allows an operator to easily note variations in finish color as well as finish text [...]
The Future of Lighting: No More Lamp Servicing or Maintenance?
While on the one hand we are seeing a shift towards an integrated LED lamp/fixture modality, there does exist the potential for a “modular” approach to LED manufacture. This sounds contradictory, but let us explain in a little more detail. While an integrated LED/fixture design is indeed the probable route of future lighting design, the actual totality of an LED based luminaire is based on a combination of several distinct parts or “modules”. LEDs themselves are only represented by the “chip”; t [...]
LED versus Fluorescent: Lumens per Watt is Only Part of the Story
Today it is commonplace to find T8 fixtures producing on the order of 80 to 100 lumens per watt of output, putting fluorescent lighting at the top of the efficient lighting ratings in terms of lumen per watt efficiency. However, this does not tell the whole story, and other factors come into play which affect the real world efficiency of fluorescent lighting and brings it a little more down to earth. [...]
Basics of Selecting Effective Paint Booth Lighting
The lighting of choice for most paint booths is standard four foot long fluorescent bulbs, usually arranged in fixtures containing either two or four bulbs grouped together. Fluorescents are popular because they produce a very wide spread of light output, which helps to evenly and uniformly illuminate the irregular surfaces of vehicles and thus better reveal imperfections in the surface to be coated. Fluorescent lamps are also popular because they can be had in a variety of color temperatures, w [...]