Made in the
The Larson Electronics
MGS-30KVA-10XEPO120-1X240 heavy duty power transformer substation converts 480
VAC three phase electrical current to single phase 120V AC and 240V (208Y) AC.
This unit provides operators the ability to safely tap into and distribute 480
Volt AC power from a variety of sources including generators and direct grid
power. This model is designed for use for both linear (motor) and non-linear
loads (lighting, computers, etc.). For that reason, we deliver 120V and
208Y on the secondary and provide a neutral.
***PLEASE NOTE: FREE
SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION SYSTEMS OR
MGS-30KVA-10XEPO120-1X240 transformer provides a safe and effective way for
operators in industrial settings to tap into and utilize power sources
independently of the work area. This unit provides an effective power source for
operators performing plant turnarounds, maintenance and cleaning in hazardous
areas, equipment installations and repairs and any activities requiring an
alternative to native power sources. This unit is designed to operate with 480
3P which it then steps down to 120V single phase and 240 (208Y) VAC 3 phase.
This transformer makes 120VAC available via ten GFCI protected 120V explosion
proof 20 amp twist lock receptacles and 208Y VAC available via one GFCI
protected 240VAC outlets. The explosion proof receptables are compatible with
explosion proof plugs such as Larson Electronics EPP-15A and EPP-20A, Crouse
Hinds plugs under catalog number "ENP5151" and Hubble-Killark
Acceptor® plugs under catalogue number "UGP-20231" and
Click Photo to
Click Photo to
Click Photo to
feet of #6 SOOW cord connects line in power to a 60 amp disconnect switch
fused at 50 amps, which controls current to the 30 KVA, 480 Volt 3 phase
transformer. The transformer is mounted to a 1/8” thick diamond plate and the
distribution assembly is mounted onto a rugged 2 inch square carbon steel
skid frame. The frame of this pwero distribution
panel features 3X6X3/8 rectangular carbon steel forklift skid
pockets, a top located pickey lifting eyelet, and four locking
casters to allow easy transport.
unit is weatherproof and ideal for use in applications including but not limited
to, plant maintenance, wet location operations, as a welding station, shows and
exhibits and marine applications. These units are popularly used in wet
locations where external power sources are often necessary and work well in
combination with explosion proof lights.
***Please note, this unit is not
rated for hazardous locations and must be located outside of the hazardous
environment. The explosion proof outlets on this unit and for compatibility with
existing explosion proof plugs. This does not classify the transformer as
Larson Electronics is a
manufacturer and as such can build transformers to your specifications. Although
we carry several models of power distribution systems, we can deliver custom
ordered units almost as quickly as our prebuilt units If this model does
not meet your needs, please contact us at 1-800-369-6671 or email@example.com.