Made in the USA
The Larson Electronics
LM-SMDE-30-8-5S-4X400LTL-LED-RD-E2E skid mount LED light plant provides a safe
and effective way for operators to quickly deploy 1,600 watts of intense
lighting to elevations up to thirty feet. The four 400 watt LED lamps produce a
wide spread of intense white light, allowing this unit to effectively cover
large work areas with high quality illumination. The light tower folds features
a rotating boom that allows for 360° of rotation, a removable mast head for
storing mounted equipment when not in use, manual crank winch for easy
deployment, and is mounted to a cube frame with skid pockets and 4-corner pick
eyes for easy transportation. Each assembly is equipped with 150` of 10/4 SOOW
cable and up to three units can be daisy chained together on 240V.
*PLEASE NOTE: ANY FREE SHIPPING
OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*
LM-SMDE-30-8-5S-4X400LTL-LED-RD-E2E five stage telescoping steel light mast
with manual crank winch from Larson Electronics’ is designed to quickly and
safely deploy 1,600 watts of intense LED lighting in locations where elevated
illumination is needed for maximum area coverage. This light boom can be
extended to 30` for maximum area coverage and collapsed to 8.83` for
applications where a footprint smaller is required. The tower is constructed of
square steel tubing with a base section 5.92` in length and 6" by 6" by 3/16"
thick, lower section 6.04` in length and 5" by 5" by 3/16" thick, middle section
6.19` in length and 4" by 4" by 1/8" thick, upper section 6.34` in length and 3"
by 3" by 1/8" thick, and an top section 6.5` in length and 2" by 2" by 1/8"
thick. Each section has a 1` overlap. The mast is elevated using an included
2,500 lbs manual hand crank winch with 3/16" galvanized steel cable.
Click Photo to
Click Photo to
Click Photo to
Included with this light tower is
one of our wet area suitable GAU-LTL-400W-LED
high output LED fixtures producing a combined total of approximately 54,000
lumens at 1,600 watts. The light head contains forty-eight Cree® high output
LEDs producing 1,125 lumens each are arranged in rows and paired with PMMA high
purity optics to produce a well focused 24° wide spot beam that is ideal for
providing far reaching concentrated illumination while still covering a
substantial amount of area. We also offer optional optics with 10° spot, 38°
narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are
tightly focused and are designed for high elevation mounting to achieve
distance, making spot versions ideal for high mast and spots lighting. The flood
beams are designed to provide more light over a larger area nearer the fixture,
making flood versions ideal for use as dedicated work and area lights. Each
floodlight is securely fastened to the light boom and each lamp includes a
stainless steel support bracket to help maintain lamp stability within its
housing. The lamps are hard wired into a NEMA 3R panel located on the end of the
Unlike gas burning and arc type
lamps that have glass bulbs, LEDs have no filaments or fragile housings to break
during operation. Instead of heating a small filament or using a combination of
gases to produce light, light emitting diodes (LEDs) use semi-conductive
materials that illuminate when electric current applied and emitting light. With
LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED
technology. By nature, LED light sources run significantly cooler than
traditional lamps, reducing the chance of accidental burns and increased
temperatures due to heat emissions. This solid state design of light emitting
diodes provides a more reliable, stable, durable, and energy efficient light
source over traditional lighting.
Heat is the single largest factor in premature LED failure and color shifting.
These LED units feature individual heat sinks per bank of six LEDs to control
heat buildup rather than utilizing a single housing to dissipate heat. This
allows for more thorough cooling of the LEDs for extended operating periods.
This allows the LEDs to be driven at up to 90% capacity without overheating or
visible loss of light output. The end result is more light with less heat and
longer LED life with an average 70% lumen maintenance after 80,000 hours. In
addition, should an LED failure occur, these LED flood lights are field
serviceable. Each bank of six LEDs can be replaced with the fixture installed.
This allows for the tower to stay in operation until repairs can take place, and
eliminates the need to remove and disassemble the entire fixture for
well as unparalleled heat control, the GAU-HB-400W-LED-SS series of LED lights
from Larson Electronics also offer IP67 rated construction that is designed to
withstand extremes of environmental and operating conditions. These units can
withstand rapid temperature changes of -40° Celsius to +80° Celsius, are
waterproof, and resist ingress of dust, dirt and humidity. The housings are
formed from die cast aluminum and the optics are high transmission PMMA with 98%
light transmittance. The Bridgelux® LEDs help these units achieve resistance to
vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We
use these LED lights for applications where a lot of vibration, dust, dirt,
dampness and abusive working conditions are encountered.
towers and assembly is powder coated with glossy blue finish for corrosion
resistances and aesthetics. The mast and controls are secured within a
cube-style frame constructed of 2" by 2" by 1/8" thick and measuring 48" wide by
48" long by 53" tall. Four 4` slide out outriggers with 1,200 lbs manual crank
leveling jacks allow operators to anchor the unit down, providing stability
during deployment. Four skid pockets allow this unit to be picked up from all
four sides, and four-corner pick eyelets allow for stable deployment via crane
operation. A 50" wide and 2" by 2" by 1/4" thick mounting plate is attached to
the upper section of the mast which provides a strong and stable platform for
the four LED light fixtures fixtures.
LM family of telescoping towers feature a proprietary mast guidance system,
which provide increased stability during high winds. This light plant system can
withstand winds up to 125+ mph when lowered to 8`, and up to 55 mph when fully
extended. When elevated to its full upright position,the mast can be rotated a
full 360°. By loosening the T-Handle, operators can rotate the mast with easy in
either direction. The mast can be positioned in one of four different
directions, and locked back in place by re-tightening the T-handle. The mast
itself spins freely with easy, and can typically be rotated with a single
mast is operated via centrally located control box with power switches within
the cube frame, allowing operators to power the LED light fixtures on or off.
Wiring is provided via 150` 10/4 SOOW cable terminated in a 30 amp L14-30P twist
lock plug. A manual roll up drum mounted within the steel cage frame provides
storage for the power cable. A waterproof L14-30C twist lock connector allows up
to three units be daisy chained together on 120V circuit or up to three units on
a 240V circuit. All electrical components are UL/cUL listed.
Larson Electronics can custom tailor these units to the customer’s
requirements with longer sections and larger mounting plates. For example, the
LM-25 is another model that reaches to a length of 25 feet, with a 15 foot lower
section and a 10 foot upper section and a 4 foot wide upper mounting
bracket. We also offer a choice of either the manual lbs hand winches
included standard or optional electric winches.
Suggested Applications: Temporary
lighting, construction sites, and security camera deployment. We can equip this
mast with 1000W or 1500W Metal Halide lights or a wide variety of high powered
LED lights with comparable power, including the GAU-LTL-400W-LED,
LEDLB-200X2E, LEDLB-160X2E or LEDLB-80X2E.