Made in the USA
*This unit is for rentals. Please
scroll down for rental rates*
Magnetic Mount Explosion Proof LED Light from Larson Electronics is rated Class
1 Division 1-2 Groups C & D and Class 2 Division 1-2 and uses a low profile
Cree LED light head to produce 17,500 lumens of light while drawing only 150
magnetic mount explosion proof LED light provides 9,000 square feet of work area
coverage with 17,500 lumens of light output. This portable LED light is mounted
to a portable aluminum frame base with legs and has a low profile LED light head
measuring 16 by 14 inches. This unit includes a magnetic mounting attachment
that allows mounting the fixture to metallic surfaces for added versatility and
easy setup. The LED light head on this unit produces a brilliant flood pattern
of light that is ideal for illuminating enclosed areas and hazardous locations
where flamable vapors, gases and dusts may be present.
explosion proof LED light fixture is comprised of a 16x14 inch LED light head
mounted atop a legged base stand fabricated from non sparking aluminum, with a
separate shelf type magnetic mounting bracket that allows mounting to ferrous
metallic surfaces. The lamp can be easily adjusted up or down 90 degrees and
locked into position by simply loosening the two T-handle adjustment screws
located on either side of the light head and retightening them once the desired
angle is found. Included with this LED light tripod is 100 feet of SOOW cord
terminating in an 1523 explosion proof straight blade plug.
explosion proof LED light head in this unit features multiple LED drivers which
helps to increase the operational life of the fixture. With traditional LED
lights, in the event an LED array or driver fails, the entire fixture no longer
illuminates. The EPL-MB-150LED series contains twelve individual LED boards
configured in a series of banks. Each bank contains two LED boards with an
individual driver. In the event of a driver failure, only one bank of LEDs will
be effected while the other banks will continue to operate. In the event that of
an LED failure, the mating LED will continue to operate.
magnetic mounting bracket for this unit includes six 200 lbs grip magnetic bases
which provide a total of 1,200 lbs of grip and allows operators to mount the
unit to walls and flat metallic surfaces. Users simply attach the magnetic
mounting bracket to the desired surface, then hang the lamp assembly from the
bracket. This bracket is constructed of non-sparking aluminum for light weight
and durability, and the simple hanging design allows operators to easily remove
the lamp assembly to operate the unit as a pedestal lamp if
unit is also multi-voltage capable and is configured to operate on 12-24 volts
AC or DC without any modifications. Please note: This fixture natively operates
on low voltage, and there is no step down transformer. Further adding to the
versatility and convenience of this explosion proof LED light are 25 peel off
mylar overspray lamp protectors that ship with the unit. The protectors provide
lamp protection from dirt or debris and can be removed, cleaned and replaced,
lessening the need for tedious lamp cleaning or replacements. This lamp is T5
temperature rated and the LED light head retains 80% of its lumen output after
50,000+ hours of use, far longer than incandescent or fluorescent lamps.
|Made in USA
1. Approved Class 1 Div1-2 Class2 Div
2. Led lamp head requires no lamping.
3. Durable magnetic
base mount constructed of copper free aluminum.
4. No ballast
box. No ballast to replace.
5. Extreme long life LEDs reduce
maintenance and replacement costs.
6. Adjustable LED light head.
25 peel off mylar overspray lamp protectors ship with the unit.
Lumens produced from only 150 watts.
9. Mercury free shock proof LED
lamp light head.
1. 50,000+ hour lifespan.
2. Can SAVE 50% or
more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
UV light, infrared radiation or CO2 emissions.
6. Bright, even light
maintains consistent color over time.
7. Instant on/off – No flickering,
delays or buzzing.
8. Very good color rendering.
10. Significantly cooler operation.
11. Less frequent outages,
higher output improves workplace
Specifications / Additional
Magnetic Explosion Proof Light
Scroll Down to
Purchase- Click here purchase the EPL-MB-150LED-LV-100
||Class 1 Division 1, Groups C and D|
|Lamp Type: Cree
||Class 1 Division 2, Group C,D|
|Dimensions: 16" x 14" Light head
||Class II, Division 1 - 2, Groups E,F,G|
||ETL Certified U.S. Standards|
|Voltage: Universal voltage 12-24V AC or DC
||ECP1523 Class 1 explosion proof plug |
|Total Watts: 150 watts
|Total Lumens: 17,500
|Luminous Efficacy: 116.67 Lm/W
|LED Lamp Life Expectancy:
5000K, 4000K, 3000K
Index: >75 CRI
|Beam Lux: 8500@ 1 Meter 1250@ 3 Meters
||Contact us for special requirements |
|Operating Temp Range: T5 Rated
-40°C to +65°C
||Toll Free: 1-800-369-6671|
|Mounting: Aluminum Base Stand
|Wiring: 100 feet SOOW Cord Explosion Proof Straight Blade Plug
Monthly, Weekly, Daily
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the product is
returned. (Rent to Own Rates) This means, we will charge the customer for the
product total and credit back the difference once the fixture is returned.
Weekly and Monthly terms are available. Customer must pay shipping to and from
the destination. Please contact us at (903) 498-3363 for further information if
Rental Prices for the
Subtract rental cost from total cost for the
amount that will be credited back to customer upon return of product. Customer
can choose to convert their rental to a purchase at any time during the rental
period. When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.