Made in the
This unit is for rentals.
Please scroll down for rental rates
The Larson Electronics
RNT-HAL-48-2L Hazardous Area Fluorescent Light Fixture is U.S./Canada U.L.
approved Class 1 Division 2 Groups A, B, C and D - UL 1598A listed, has
a T4A temperature rating and ideal for hazardous locations
where flammable chemical/petrochemical vapors may be occassionally
The RNT-HAL-48-2L fixture is a 4 foot long, 2 lamp, UL listed Class 1
Division 2 Groups A, B, C and D hazardous area fluorescent light and a good
choice for use in applications where space is at a premium. This fixture is T4A
temperature rated, comes standard with F54-T5/850/HO bulbs, and is available
with optional T12/HO and T8/841 bulbs.
The lamps are protected by an aluminum framed shatter and heat
resistant clear acrylic lens secured with ten draw latches and
the fixture is constructed of copper free aluminum alloy. The lamp reflector is
corrosion resistant heavy gauge aluminum and coated with a high gloss reflective
finish. This fixture is multi-voltage capable and is U.L. 595 and UL 1598A
Marine Type approved for use marine environments. The RNT-HAL-48-2L provides
operators in hazardous locations with a compact, reliable and affordable
lighting solution for open areas where flammable chemicals and vapors may
occasionally be present.
Click Photo Enlarge
Click Photo Enlarge
Click Photo Enlarge
LAMPS: This fixture comes equipped
with F54-T5/850/HO – 54 Watt lamps producing 5,000 lumens per bulb, a 5000
Kelvin color and a 20,000 hour rated service life. We offer F48-T12/HO – 4050
lumens per bulb, 12,000 hours life, 4100 Kelvin color and F32-T8/841 – 2950
lumens per bulb, 24,000 hours life, 4100 Kelvin color tubes as lamp options for
this fixture. The RNT-HAL-48-2L has an electronic multi-voltage ballast and
works with 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ and 277 Volts 60 HZ.
Each bracket is
cinched to the bracket mounting peg on each side of the light. The angle of the
bracket is set by tightening two cap screws on either side of the bracket. The
cap screws act as a set screw. The bracket itself is mounted via a single bolt
hole at the top the bracket. There are two brackets, one on each end of the
light. Once the brackets are mounted to a surface (ceiling, floor or wall), the
light fixture can be removed from the brackets by loosening the cap screws that
hold the bracket to the mounting peg. Mounting brackets are removable. A single
through hole enables the operator to install the light to any surface. Pendant
mounts are available for operators who wish to mount these fixtures away from
the ceiling surface.
Applications: Aircraft maintenance, Oil
drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants,
Chemical manufacturing, Waste treatment plants, Gas processing plants.
|Made in USA
1. Each unit dialectrically tested.
arrives assembled and lamped to reduce installation time and cost. Adjustable
mounting brackets enable the operator to choose any mounting angle for the
fixture, where other models may only offer one or three choices.
constructed streamlined ribbed corrosion-resistant, copper free extruded
aluminum body for better hear dissipation and extended ballast life.
4. Aluminum extruded lens frame for greater strength
done via 10 draw latches, which enable the operator to unlatch
the lens and access the lamps.
6. Heavy gauge extruded aluminum
reflectors with high gloss reflective finish. Resists dents and corrosion.
3/4 inch, threaded access hole for wiring conduit.
8. Units can be wired end
to end in series.
F54-T5/850/HO – 54 Watt, 5000 lumens per bulb, 20,000 hours life, 5000
F48-T12/HO – 4050 lumens per bulb, 12,000
hours life, 4100 Kelvin color
F32-T8/841– 2950 lumens per
bulb, 24,000 hours life, 4100 Kelvin color
F48-T8/HO - 48 watt, 4000 lumens per
bulb, 18,000 hours life, 4100 Kelvin color (Suffix -T8HO)
Specifications / Additional
Scroll Down to
Purchase- Please note: 2 day lead time on this
United States - Canada
||Class 1 Division 2, Groups A, B, C, D
|Dimensions: W-7" L-49 3/4 " H-6 1/8 "
||UL 595 Outdoor Marine Type (Saltwater) |
||UL 1598A Marine Type |
|Total Watts: 108 watts*
||California Title 24 Compliant|
|Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz
|Total Lumens: STD-T5-HO
|Lamp Life Expectancy: STD-T5-HO Bulbs
|Efficiency: STD-T5-HO Bulbs
92 Lumens per Watt
|Operating Temp Range:
T4A Rated -30°C to +70°C
5000K- T5-HO Bulbs
|Mounting: Bracket Standard - Pendant Optional
3/4 inch threaded
||Contact us for special requirements |
|U.L Approval: U.S Certificate
||Toll Free: 1-800-369-6671|
Temp: -30 C
|Maximum Case Temp: 90 C
|Rental Type: Monthly, Weekly, Daily
are lamps only and may vary with different lamps.
|*Temperatures above +65°C will diminish ballast life
from 5 years to 3 years
|Rental Prices for the
USD Subtract rental cost from total cost for
the amount that will be credited back to customer upon return of product.
Customer can choose to convert their rental to a purchase at any time during the
rental period. When returned, deductions will also be made for shipping,
repairs, and excessive cleaning, if needed.