Made in the USA
The Larson Electronics
WCDE-11-PLM50-16X500LTL-LED is a self contained LED lighting package that offers
high output illumination and fuel savings over traditional light plants. This
trailer mounted fold over 7-stage pneumatic light plant provides a safe and
effective way for operators to quickly deploy the sixteen 500 watt LED light
heads to elevations up to fifty feet. This pneumatic light tower folds over for
easy transportation, features a hydraulic ram upright assist, air powered
pneumatic mast and high output LED fixtures. The LED light tower is powered by a
11 KW Kubota diesel generator with a 110 gallon fuel tank. The entire assembly
is mounted onto a 21` by 8` tandem axle trailer, allowing operators to transport
this fold over boom from location to location.
*PLEASE NOTE: ANY FREE SHIPPING
OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS*
WCDE-11-PLM50-16X500LTL-LED Megatower™ is a self contained, towable, high power
light tower package. This unit contains a water cooled diesel engine powering a
11KW Kubota generator, which supplies the current for sixteen 500 watt LED
lights producing 60,000 lumens each, for a combined total of 960,000 lumens of
light. This unit can run uninterrupted for up to 43 continuous hours without
refueling and includes a pneumatic telescoping light mast which can elevate the
sixteen high output LED lamps to a height of 58`. This mobile floodlight package
is ideal for large scale event illumination, construction, mining, industrial
operations, and anywhere a mobile full power lighting system capable of extended
operation is needed.
telescoping seven stage pneumatic light mast from Larson Electronics’
is designed to allow operators to quickly and safely deploy up to 8,000 watts of
high intensity LED lighting in locations where illumination must be elevated to
heights up to 58` for effective coverage. This light boom can be extended
to 58` for maximum area coverage, and collapsed to 22` for applications where a
footprint smaller is required. The tower is constructed of heat treated aluminum
tubing with 2.69` foot of overlap per section. The mast is elevated using an
included hydraulic ram, and extended to its full height using a trailer mounted
wide by 109.5" tall and 2" by 2" by 1/4" thick steel mast head is attached to
the upper section of the mast which provides a strong and stable platform for
the sixteen 500 watt LED light heads.
with this light tower is one of our wet area suitable GAU-LTL-500W-LED
high output LED fixtures producing a combined total of approximately 60,000
lumens at 500 watts. The light head contains forty-eight CREE® high output LEDs
producing 1250 lumens each are arranged in rows and paired with PMMA high purity
optics to produce a well focused 24° wide spot beam that is ideal for providing
far reaching concentrated illumination while still covering a substantial amount
of area. We also offer optional optics with 10° spot, 38° narrow flood, 60°
flood, and 90° wide flood beam spreads. The spot beams are tightly focused and
are designed for high elevation mounting to achieve distance, making spot
versions ideal for high mast and spots lighting. The flood beams are designed to
provide more light over a larger area nearer the fixture, making flood versions
ideal for use as dedicated work and area lights. Each floodlight is securely
fastened to the light boom and each lamp includes a support bracket to help
maintain lamp stability within its housing. The lamps are hard wired into a NEMA
3R panel located on the end of the telescoping boom.
here to see the lighting layout comparison of the metal halide verses LED
Megatower light plants from Larson Electronics.
Unlike gas burning and arc type
lamps that have glass bulbs, LEDs have no filaments or fragile housings to break
during operation. Instead of heating a small filament or using a combination of
gases to produce light, light emitting diodes (LEDs) use semi-conductive
materials that illuminate when electric current applied and emitting light. With
LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED
technology. By nature, LED light sources run significantly cooler than
traditional lamps, reducing the chance of accidental burns and increased
temperatures due to heat emissions. This solid state design of light emitting
diodes provides a more reliable, stable, durable, and energy efficient light
source over traditional lighting.
Click Photo to Enlarge |
well as unparalleled heat control, the GAU-LTL-600W-LED series of LED lights
from Larson Electronics also offer IP67 rated construction that is designed to
withstand extremes of environmental and operating conditions. These units can
withstand rapid temperature changes of -40° Celsius to +80° Celsius, are
waterproof, and resist ingress of dust, dirt and humidity. The housings are
formed from die cast aluminum and the optics are high transmission PMMA with 98%
light transmittance. The CREE® LEDs help these units achieve resistance to
vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We
recommend these LED lights for use in applications where a lot of vibration,
dust, dirt, dampness and abusive working conditions are encountered.
Heat is the single largest factor in premature LED failure and color shifting.
These LED units feature individual heat sinks per bank of six LEDs to control
heat buildup rather than utilizing a single housing to dissipate heat. This
allows for more thorough cooling of the LEDs for extended operating periods.
This allows the LEDs to be driven at up to 90% capacity without overheating or
visible loss of light output. The end result is more light with less heat and
longer LED life with an average 70% lumen maintenance after 80,000
The pneumatic telescoping boom is constructed of heat treated aluminum with
an powder coated finish and extends up 58` in height. This boom is raised
from and lowered to the folded position by a single hydraulic ram, and extended
or retracted by pnumaitc system with equipped air compressor.
The LED light heads are grouped into banks of four. Each bank in wired into the
NEMA 3R breaker control box at the base of the mast. Operators control the light
heads via an on/off switched breaker per bank of four light heads. The air
compressor and battery charger are also powered from within this breaker box.
Power is provided to the control box via an integraged 11KW genset. The mast
elevation is controlled by a push button switch to operate the hydraulic ram,
allowing operators to raise the mast to the upright position. The vertical
deployment is operated by an up/down level, allowing operators to extend it to
its full 58` height or retract it to the collapsed height.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge |
The above image show a side by side comparison of the WCDE-20-HLM65-20X500LTL-LED-WSM next to a 50` Pneumatic Megatower.|
WCDE-11-PLM50-16X500LTL-LED Megatower™ includes a Kubota Lowboy II GL11000TM
genset that houses a Kubota D722 diesel engine that powers the 11KW 120/240V
brushless generator. This genset is liquid cooled and features a single phase
generator with electric start ignition. The diesel generator runs at 3600 RPM
and is equipped with an EPA/CARB Tier 4 emissions system. A 110 gallon fuel cell
sits beside the genset and is equipped with an electric fuel delivery system.
The fuel cell is constructed of single a heavy gauge steel single wall frame
with internal anti-splash baffles. This genset features key operated electric
starting, a twelve volt electrical system, liquid cooling, replaceable dry
element air cleaner, and a full enclosure for safe operation and protection
against the elements. This engine also features cold weather options to improve
performance under cold weather conditions.
Click Images to enlarge. |
The above images show a side by side comparison of the light output between our LED light plant and a traditional four lamp metal halide light plant. The left image shows the metal halide light plant raised to 30` and illuminating a 50,000 sq ft work area with four 1000 watt metal halide light fixtures. The right image shows the WCDE-20-HLM65-20X500LTL-LED-WSM light plant raised to 50`, illuminating the same 50,000 square foot work area with twenty 480 watt LED fixtures. Notice how the color and intensity of the work area is greatly improved when lit up by the LED fixtures. |
Click Images to enlarge. |
The left image above shows the light mast illuminating a 300,000+ square foot area. The yellow billboard in the image reaches 40 lux, while the fence at the tree line (480`+ away from the tower) reaches 35 lux. This image was taken from 50` behind the mast and at 100` above ground level. The image to the right shows the work space 75` in front of the mast, with the entire area work area reaching over 100 lux. The mast was extended to 35`.
The left image above shows the same 300,000+ square foot area being illuminated. In the background you can see a vehicle with their headlights on, barely able to be seen in comparison to the WCDE-20-HLM65-20X500LTL-LED-WSM light plant. This image was taken at 80` to the right of the mast and 175` above ground level. The mast was extended to 35`. The image on the right is a Google Earth export of the physical area being illuminated, for scale purposes.|
entire unit is mounted onto a four wheel, tandem axle trailer constructed of 8"
box steel equipped with torsion axles. Each torsion axle is rated at 7,000 lbs
and equipped with P235/80R16 tubeless tires and wheels. The rear axle is
equipped with electric brakes. Tongue weight is rated at 650 lbs and an
adjustable 3” lunnett eye for pintle hitches provides secure hookup to tow
vehicles. A single 7,000 lbs rated tongue jack provides a stable
connect-disconnect platform as well as additional stability during tower
deployment. Standard heavy duty safety chains are included. This trailer also
includes a front mounted storage area for stowing tools and accessories. The
trailer is finished in industrial grade Dupont™ paint for protection against
rust and corrosion and provides an attractive finish. Overall dimensions of the
entire trailer and boom assembly in the stowed for travel configuration is 21`
long by 8’ wide.
7,000 lbs hand crank jacks are used for raising the trailer up off the ground,
and four 7,000 lbs hand crank jacks mounted on extending outriggers are used for
leveling and stabilizing the trailer assembly. Each of the four jacks are
attached to a pivoting outrigger constructed of 6` by 6" by 6.3" steel I-beams.
The jacks can be leveled by hand crank or attachment provided for power drills.
These outriggers can be extended 6` out from the side of the trailer for added
stability. This light plant can withstand 35 mph winds when fully extended. When
lowered to 30`, the mast can withstand 50 mph winds. When lowered to 22`, the
mast can withstand wind speeds up to 95 mph with gusts of 125 mph. Custom builds
can be provided for higher wind speed resistance when fully raised.
sixteen 500 watt LED light heads have a considerably less amp draw than the
metal halide light heads on traditional light plants. This allows the
WCDE-11-PLM50-16X500LTL-LED to achieve up to 43 hours of continual use on a
single tank of gas when only operating the light heads and air compressor. When
running 24 hours a day and 7 days a week, this LED light plant will run for
nearly 2 days straight without refueling. When the genset is running for 12
hours a day, this tower will provide on-site illumination for up to 4 days
before needing more fuel. This self contained LED light plant provides operators
with a worry free and energy efficient alternative to metal halide light
offer a choice of finishing, equipped light heads, and with or without gensets.
These towers can be fitted with Larson Electronics line of high output light
heads, or customize the mast head to meet the mounting requirements for your
equipment. Optional diesel generators and fuel cells can be equipped from
factory, or retrofitted after purchase.
face="Verdana, Arial, Helvetica, sans-serif">Cold Weather
Package: The LM-50-5S-TLR-16X500LTL-LED is designed to withstand
extreme cold environments and harsh winters. The pneumatic system is equipped
with a de-icing system to prevent the air compressor, air lines, and pneumatic
mast from freezing from moisture building within the air system. This de-icing
system uses an environmentally friendly (non-toxic) fluid. All air lines are
equipped with cold weather rated hydraulic hoses rated for -65°C and fitted with
metallic hardware. The air compress consists of an oil-less unit equipped with
an aluminum air regulator, stainless steel ball valves, and stainless steel
valve controls. The head of the air compressor is wrapped with heat trace to
prevent the compressor from freezing over in subzero temperatures. All the
pneumatic controls are housed within an insulated and weather tight enclosure.
This pneumatic control box features 1/2" thick polystyrene foam insulation and
hydraulic system features -65°C cold weather rated rubber hydraulic hoses with
metallic fittings and a cold weather rated high viscosity hydraulic fluid. The
battery system that powers the hydraulic system features a cold weather rated
sealed acid glass mat 12 volt battery wrapped in a heated battery blanket. A
cold weather rated battery charger keeps the 12 volt battery charged. All
battery components are enclosed within a NEMA 3R housing. All electrical
components are wired using cold weather rated SOOW cable with rated to -50°C
that features high flexibility, and extreme abrasion, acid, oil, and water
resistance even in sub-zero climates.
Kubota genset is retrofitted with a coolant heater to keep engine temperatures
at optimum levels. The fuel system is equipped with an in-tank fuel heater to
prvent gelling in arctic environments. The genset is equipped with 0W-40
synthetic oil. The genset`s electric battery is equipped with a battery
Suggested Applications: Temporary
lighting, construction sites, and security camera deployment. We can equip this
mast with 1000W HID-22-SL-REM or 1500W HID-22-15M-SL-REM Metal Halide lights or
a wide variety of high powered LED lights with comparable power, including the