Lighting Solutions for the Paramedics, Firefighters, and the Police Officers who help keep us safe!
Larson Electronics specializes in industrial and explosion proof lighting solutions. We also carry a great line of work area lights, flashlights, spotlights, power distribution panels and light towers to meet any specifications or requirements.
Our HL-85 is a 100 watt halogen handheld spotlight that emits 1800 lumens of light. This spotlight has a beam that is capable of reaching 900 feet long and is available in a 5 inch lens or a 7 inch lens configuration. Rotating the housing enables the operator to adjust the beam from a wide, soft flood pattern to a tight, spot beam. It is shipped with a 16 foot coil cord with a cigarette plug and pulls 8.5 amps on a 12 volt system. The HL-85 is the perfect handheld solution for spot searching from a vehicle or ATV. For those on the run applications, we offer a rechargeable version of this light.
If you are looking for more of a compact solution, we also offer a 10 watt LED handheld spotlight. The beam on this 10 watt LED spotlight is approximately 800 feet long by 175 feet wide and it produces 800 lumens of light. The HL-85-10W1 is also operated with a 16 foot cord with a cigarette plug that operates on any voltage ranging from 9-32 volts and pulls 1 amp on a 12 volt system. We offer this in a rechargeable version also.
The EXP-LED-51 explosion proof LED rechargeable LED flashlight is a highly versatile and effective lighting solution for operators who require a dependable source of powerful illumination suitable for use in hazardous locations. This explosion proof flashlight is only 6" long making it suitable to fit in any bunker jacket. It features two modes of operation. In high mode, the light produces 130 lumens and will run for 4 continuous hours. On low mode, the light will run for 12 hours and will produce 50 lumens of light. This light is shipped with a wall charger and a car charger.
The EXP-LED-HL-1W explosion proof headlight produces an intense light beam while providing up to 11 hours of illumination. A single watt Luxeon high intensity LED mounted within an impact resistant housing is powered by 3 AA batteries to produce a long lived light beam with 120 lumens of light. This headlamp is shipped with an elastic head strap and an adjustable rubber hard hat strap. This headlight has a rubber dome push button switch that allows easy operation even when wearing gloves making it the perfect hands free solution for any fireman that needs both hands to complete a job.
The EXP-LED-F4W is a 4 watt LED flashlight that produces a tight round spot beam with clearly defined edges, giving it excellent range and intensity. A rubber push button switch provides easy operation while a knurled body design allows for maximum grip and control. Power for this light is provided by three AA batteries and powers this unit continuously for 80 hours. This light produces a beam that is 100' long with 90 lumens of light output. Being only 7 inches long, this light is great for a bunker jacket as well as hanging on an officers belt in a holster.
The RUL-9 is a hazardous area portable light that provides five hours of run-time on a single charge. This portable hazardous area light is rechargeable and produces 1100 lux at 25 feet. This light is waterproof to provide all weather durability and has an articulated head which allows the user to position the lamp head through 90 degrees of movement. the high output 12 watt lamp in this unit is combined with a high quality reflector to produce 246 lumens and provides a strong beam.
The EXP-LED-RL-FX5R is a rechargeable flashlight that produces 405 lumens of light output and includes secondary rear mounted LEDs and five possible modes of light operation. A trigger style switch allows operators to cycle through five possible light modes and operate three rear mounted LEDs independently or in tandem with the main forward LEDs. This flashlight has a 12 run-time on a single charge and is constructed with a high impact ABS plastic body and unbreakable Lexan Lens for durability.
We carry a wide selection of LED post mount lights. These LED post mount lights are equipped with a 30 watt LED light head that produces a beam length of 600 feet. We offer the housings in black or chrome. The Belton, MO cops have equipped all of their cars with these LED lights and they love them! All you have to do is type the year, make and model of the vehicle in our search box to find the one you need. Need Help? Just Call!
The GL-3021H HID Stryker produces a 3,000 lumen light beam capable of reaching over 5,000 feet in distance. This 35 watt HID light offers wired remote pan and tilt control, a single dash mount joystick remote control, and a housing with a durable black finish. With a 360 degree rotation, this light is the perfect solution for spotlighting in the dark when an officer is on the hunt. Need a solution that is not permanent? Check out the GL-3051H-M . We carry a wide range of these spotlights. Just tell us your preference!
The PLM-18-3X150W-LED Pneumatic Light Tower is an 18 foot extendable light tower equipped with three LED light fixtures that produce approximately 44,370 lumens of light. The mast is elevated using an included 250 watt 220 volt AC, 1/3 horsepower air compressor allowing for quick deployment in an emergency. This three section light boom can be extended to 18 feet for maximum area coverage and collapsed to 8 feet for closer, more intense illumination. The three light heads mounted to the mast provide an instant on solution and are 150 watts each.These light masts are typically mounted to trailers or other stable surfaces via a 12 inch square, 1/2 inch thick mounting base plate which has been predrilled to accept four 3/4" mounting bolts. This light mast is a great solution for when the power goes out and can be mounted to any fire truck for instant lighting.
The WAL-QP-P10W-40X2E-25 Quadpod Mounted Work Area LED Light produces 3,440 lumens of light. This quadpod was designed for the Illinois Department of Transportation to illuminate a flaggers staion at night to help provide illumination and security for the oncoming traffic. The LED light head on this unit produces a wide flood pattern of light that is ideal for illuminating work areas such as construction sites, flagger stations, emergency scenes and events. This adjustable and collapsible quadpod can be extended to fourtenn feet and collapsed to five feet and is secured in position with t-handle lock screws. The light head can be removed by releaseing the hand knob and sliding the light and bracket off of the center support for storage and transport.
The WALTP-2XWP400 LED light tower provides high intensity output and a telescoping tripod tower that is extendable from 3 feet to 10 feet. The LED light heads on this unit produce 2,924 lumens of light while drawing 80 watts of power. This LED light tower is designed to withstand demanding conditions and is waterproof, vapor proof and built to resist the damaging effects of an outdoor environment. The LED light heads are comparable to 400 watt metal halides and are a quick, convenient lighting soultion in any emergency. The tripod legs collapse and the light head bracket is removable for simple portability and deployment. The heavy construction of this tripod and the light weight of the LED light heads help to make this a very stable unit, even in windy conditions.
Are you a volunteer and need a lighting solution for when the emergencies arise?
The SL-360-M-R is a 360 degree magnetically mounted beacon that is battery powered and provides up to 40 hours of operation on a single set of four AA batteries. This LED beacon is red in color and is 100% portable, with a magnetic mount and battery operation that allows it to be operated wherever a powerful beacon is needed. With no need for wiring, this light is ideal for applications where a signal light is needed on an occasional or temporary basis such as farm equipment, warehouse equipment, cars or trucks.
The 9200-S-M mini strobe light bar is compact and encloses two amber strobe beacons within a clear polycarbonate lens for durability and protection form elements. Four magnets, each with 45 pounds of grip, provide secure mounting to vehicles, boats, equipment and machinery. A 16 foot cord ending in a cigarette plug provides easy connection to standard plug sockets in automobiles and other vehicles that are equipped. The cigarette plug on this unit is equipped with an integrated on/off switch on the back of the plug so you don't need to remove the plug from the socket.
The LEDB-4 offers a choice of colors and is designed to provide a high power signal with a full 360 degrees of visibility. This unit contains 3 modules, each containing 6 LEDs, that are specially mounted within a clear Fresnel lens to produce a full 360 degrees of signal radiation when the unit is powered on. This waterproof and shock resistant unit produces a triple flash strobe pattern that makes it ideal for work, industrial, utility and security applications. The dual purpose base includes an internal magnet and external ears for surface mount applications.