Larson Electronics larsonelectronics.com Offers Safe & Fast Lighting Setup with Telescoping Light Booms
Larson Electronicss’ EPL-LM-36-4-MH light tower is designed to provide powerful hazardous location illumination in large areas without compromising safety and effectiveness. Capable of being extended to 36 feet in total height, this light tower allows operators in hazardous locations to quickly and easily deploy 4, 1,000 watt metal halide lamps with minimal effort. The extendable tower portion of these units are constructed of square steel tubing for high strength and can be extended to a maximum of 36 feet during light deployment and collapsed to 16 feet for transport.
Designed to withstand demanding working conditions and the rigors of transport, these light towers are fitted with four 1,000 watt metal halide fixtures to produce 440,000 lumens of light in a wide flood pattern for maximum coverage of the work area. Elevating these light towers is accomplished using an included 1,000 lbs hand winch and then fully extended to their full height via a second 1,000 lbs hand winch.
The most commonly used configuration for these towers includes mounting them to trailers or other stable surfaces, so in order to address this, these towers are designed with a 12 inch square, ½ inch thick mounting base-plate drilled to accept four mounting bolts. The metal halide lamps used with this unit are Class 1 Division 2, groups A, B, C and D approved and IP65 rated against intrusion from dust and water. These light towers are also UL1598, 1598A compliant and suitable for use in marine conditions and wet locations where dampness and water may be encountered making them ideal for illuminating large scale outdoor locations. The lamps contain, within their weatherproof housings, ballasts that are multi-tapped for 120V, 208V, 240V, and 277V electrical power and can be ordered in 220 Volt 50Hz and 480 volt configurations as well. Larson Electronics is a manufacturer and can handle custom orders, special lighting requirements and offers several possible configurations to further tailor lighting to the customers needs.
“The EPL-LM-36-4-MH Class 1 Division 2 metal halide tower is the solution to high powered oilfield lighting,” said Rob Bresnahan, with Larson Electronics’ larsonelectronics.com. “Customers are looking to illuminate large work areas and often times have their own established generators or other power sources. We provide the tower and the hazardous location lighting that easily mates with those pre-existing power sources. In some cases, we will provide our portable power distribution systems to support wide area hazardous location lighting applications. While this hazardous location light tower is an established solution, we can accommodate custom applications as well.”
Larson Electronics.com carries an extensive line of portable light towers, metal halide lights, explosion proof lights, work area lights and HID work lights. You can view Larson Electronics’ entire Larson Electronics inventory of high grade lighting equipment at Larson Electronics.com. Larson Electronics can be reached directly by calling 1-800-369-6671 or 1-214-616-6180 for international inquiries.