110/120 Volt Flood Lights
110 Volt Flood Lights designed for heavy duty industrial work area lighting. These 110 volt flood lights are built with steel and aluminum frames and high wattage light fixture designed to cover thousands of square feet. 110 volt flood lights can be used as work area lights, scene lights, etc. All of our 110 volt flood lights are made here in the USA.
| Showing items 1-44 of 1127 |  |
| Showing items 1-44 of 1127 | |
| Related Articles |
| | 08/04/13 | Looking at Outdoor Security Lighting Basics
In order to effectively utilize security lighting it is very important to remember that it is not so much the fact that an area is illuminated that makes it effective, but that the area can first actually benefit from illumination, and second that this illumination is properly chosen and installed. Security lighting when improperly installed or used in areas where it will not facilitate the observation of the illuminated area can actually increase the problems associated with criminal activity. [...] |
| | 02/28/13 | Understanding the Basics of Modern Lighting Technology
Although the incandescent bulb requires little more than a source of electrical power, HID and fluorescent bulbs require ballasts, and LED lighting requires voltage regulating circuitry known as drivers. Since ballast and drivers can also consume electrical power as well as the lamp itself, it is important to consider the total energy consumed by the system versus lumens produced. [...] |
| | 08/18/12 | Mobile Light Tower Options: Modern Outdoor Lighting Systems
For most mid to large scale worksites, the most popular light towers are by far mobile lighting systems mounted to towable trailers and equipped with their own diesel generators. These systems are ideal for continuous use, and depending upon the size of the generator capable of illuminating anywhere from three to ten acres effectively. Masts for these towers are generally folding or telescoping designs, with some incorporating a combination of both for both excellent height adjustment and compac [...] |
| | 06/29/12 | Heavy Duty Light Tower Basics
In order to make the best choice of light tower an operator should be familiar with some of the most common tower and lamp combinations. Metal halide lamps currently dominate the tower lighting industry due to their high output and good light quality, while high pressure sodium lamps offer poor light quality but excellent efficiency. LED lamps are quickly gaining in popularity due to their high output, good light quality, and extreme long life and durability, but bring with them a higher price t [...] |
| | 02/02/12 | High Power Light Towers: Nighttime Construction Lighting of Choice
Some of the most serious issues associated with the use of large light towers concern glare and dark spots. For drivers approaching a nighttime road construction project, the fast and extreme increase in brightness can be difficult to adjust to after miles of driving under relatively low light levels. This problem is exacerbated by light towers that are not properly adjusted to direct light onto the work site without creating glare for oncoming traffic. [...] |
| | 12/20/11 | Temporary Power Distribution Within Industrial Construction Projects
The electrical power utilized by contractors often starts out as a primary high voltage connection to the local grid. These voltages vary according to the utilities involved and can exceed 11,000 volts. The first step is to reduce this to manageable voltages through the use of temporary power substations which reduce this current to 480VAC. Once this is achieved, the 480VAC power can be fed into distribution panels for routing through the structure. To provide power to every location within the [...] |
| | 10/18/10 | Metal Halide Light Towers: Mitigating Glare
Of the several trends in construction taking place today, increasing the efficiency and safety of projects are usually the chief driving factors behind them. With the current shifting of operations such as road work towards nighttime hours occurring more and more frequently as companies and municipalities seek to lessen the impact these operations have on traffic flow and nearby businesses, lighting has become an increasingly important concern. [...] |
|
| 
