Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no
filaments or fragile housings to break during operation and/or transportation.
Instead of heating a small filament or using a combination of gases to produce
light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current is applied, providing instant illumination with
no warm up or cool down time before re-striking. Because there is no warm up
period, this light can be cycled on and off with no reduction in lamp
lights run at significantly cooler temperatures than traditional metal halide
and high pressure sodium lights and contain no harmful gases, vapors, or
mercury, making them both safer and more energy efficient. No extra energy is
wasted in cooling enclosed work areas due to external heat emissions from bulb
type lights, and the operator risks associated with traditional lighting
methods, such as accidental burns and exposure to hazardous substances contained
in the glass bulbs, are eliminated. In addition, LEDs are also safer for the
environment as they are 100% recyclable, which eliminates the need for costly
special disposal services required with traditional gas burning and arc type
LED Drivers: Even
in LED fixtures, heat is the single largest factor in premature light failure
and color shifting. As a result, many manufacturers reduce the output of their
LEDs in order to reduce the amount of heat produced. Rather than lower light
output or quality, Larson Electronics addresses this problem with the addition
of electronic LED drivers. These internal drivers provide the ability to
automatically monitor and adjust input current to maintain the correct LED
voltage levels regardless of input levels across a specific range. This not only
reduces the energy dissipation, effectively lowering the operating temperature
of the fixture, but also prevents AC over-voltage and short circuit loading
making this fixture virtually maintenance free. Because the electronic drivers
allow the EPL-HB-2X150LED-RT to run at a cooler internal temperature and
regulates the electrical current, energy efficiency and LED service hours are
maximized while at the same time reducing operating costs and downtime incurred
from the frequent servicing intervals required with other hotter running
explosion proof LED light fixture features multiple LED drivers which helps to
increase the operational life of the fixture. With traditional LED lights, in
the event an LED array or driver fails, the entire fixture no longer
illuminates. With the EPL-HB-2X150LED-RT series of explosion proof lamps from Larson
Electronics, each LED fixture contains twelve individual LED boards configured
in a series of banks. Each bank contains two LED on a single board with an
individual driver. In the event of a driver failure, only one bank of LEDs will
be effected while the other banks will continue to operate. In the event that of
an LED failure, the mating LED will continue to operate.
Click Photos to
60° Beam Angle
125° Beam Angle Plug
140° Beam Angle Plug
Beam Angles: When
used as a fixed mount fixture, the varying beam angles need to be mounted at
certain heights in order to achieve the greatest coverage and efficiency in both
high bay and low bay lighting situations. The 60° beam should be mounted in high
bay fixtures over 25' in height and 25' away from objects if used as a wall
mounted light. The 125° beam is ideal for low bay fixtures in a height range of
15-25 feet and the same distance away from objects when the wall mounting option
is employed. The 140° beam is best used as a low bay fixture in areas with a
ceiling height of 15' or less or for illuminating objects up to 15' away when
LED light on this unit produces 13,000 lumens for a total of 26,000 lumens
with a color temperature of 5600K standard and a color rendering index of 75
which produces colors and details much more accurately than high pressure sodium
or mercury vapor luminaries. We also offer a 3000K warm white and 4500K natural
white color temperature options (longer lead times may apply for non-standard
temperatures). This lamp uses Cree LED units that have been chosen for their
high lumen per watt ratio and extreme longevity. These Cree LEDs generate a
robust 86.67 lumens per watt effective lumen output and have a 80% lumen
retention at 60,000 hours, giving them better efficiency and operational life
than traditional light sources.
Field Serviceability: This explosion proof LED light fixture is field serviceable. All major internal components can be purchased from Larson Electronics and installed by a licensed electrician with basic tools. With most explosion proof fixtures, the fixture must be returned to the manufacturer for repair work, which presents downtime and long turn around times for repair work. Larson Electronics addresses this issue with the EPL-HB-2X150LED-RT series with field serviceability, allowing operators to perform service work without having to return the fixture to the manufacturer in the event of damage or failure.
|Amp Draw @ 120V
|Amp Draw @ 220V
|Amp Draw @ 240V
|Amp Draw @ 277V
|Amp Draw @ 12V
|Amp Draw @ 24V
|Operation cost per
(12hs/day @ 12c/kWh)
|*Includes ballast factor of
1.15 for metal halide
Each LED light fixture has the
potential to save $325.00+ per year in electricity alone, not including
maintenance costs, operational downtime, reduced productivity, HVAC loads, or
carbon footprint. When retrofitting an entire facility with 100s of light
fixtures, the return on investment of LED over metal halide becomes
light is universal voltage capable and can be operated with 100-277V AC, 50/60
Hz without modifications to the fixture, and a low voltage version of this LED
fixture that operates on AC/DC voltages from 11-25 volts for rigs and vision
systems. 18-48V AC/DC voltages are available for network systems and marine vessels. We also offer an additional 347-480V high voltage and 0-10V dimmable versions of this
explosion proof LED light fixture.
EPL-HB-2X150LED-RT offers several mounting options including ceiling mounting,
pendant mounting, and wall mounting. Ceiling and wall applications are mounted
using the adjustable swivel mount bracket found on the rear of the unit. Pendant
applications are mounted from the ceiling and are suspended by rigid pipe via
the 3/4" NPT hub on the back of the explosion proof fixture. Wiring is fed
through rigid pipe to the junction box and tied in to the fixture’s lead wires,
completing the electrical connection.
explosion proof LED light fixture is paint spray booth listed, IP67 rated,
dust-proof, and protected against high pressure jets and temporary submersion.
The cast aluminum body and LED lamp give this light excellent durability and
resistance to vibration and impacts. The housing is specially designed to
dissipate heat which increases the efficiency and lifespan of the LEDs and
Applications: The EPL-HB-2X150LED-RT is approved for use within
environments where flammable or combustible gases, vapors, dusts, fibers, and
flying exist or stand the potential to exist, and is ideal for a wide variety of
Applications include but not limited to aircraft maintenance,
alcohol processing, aerospace, chemical manufacturing, coke processing, cold
storage, compressed natural gas (CNG) facilities, cranes, cryogenics,
distilleries, food processing (with food grade gasketed polycarbonate lens: EPL-HB-150LED-RT-188), fuel storage, gas processing plants, grain processing,
laboratories, liquefied natural gas (LNG) facilities, liquid propane gas (LPG),
manufacturing, marine vessels, methane production, mining, offshore, oil
drilling rigs, oil refineries, paint spray booths, paper processing,
petrochemical, pharmaceuticals, power plants, production refineries, sand blast
cabinets, sewage and septic tanks, shipyards, solvent and cleaning areas,
storage facilities, tank farms, tankers, textile, washdown areas, waste
treatment plants, and woodworking. Click
here to read the NEC description for explosion proof and hazardous
Larson Electronics, we do more than meet your lighting needs. We also provide
replacement, retrofit, and upgrade parts as well as industrial grade power
accessories. Our craftsmen can custom build any lighting system and/or
accessories to fit the unique demands of your operation. A commitment to
honesty, quality, and dependability has made Larson Electronics a leader in the
lighting and electronics business since 1973. Contact us today at 800-369-6671
or message email@example.com
for more information about our custom options tailored to meet your specific
1. Low power consumption.
3. Fixture constructed of extruded corrosion resistant
copper free aluminum alloy.
4. Superior color rendering compared to HPS, LPS,
5. Retains 80% lumen output after 60,000 operating hours.
coated aluminum fixture body.
7. Pendant and Swivel Bracket mount
8. Low profile - Light weight
9. 26,000 Lumen output from
only 300 watts
10. Multiple LED Driver Banks for Redundancy
Spray Booth Approved
1. 60,000 hour lifespan.
2. Can SAVE 50% or
more on energy.
3. Qualifies retrofit projects for financial incentives,
including utility rebates, tax credits and energy loan programs.
energy use and prolongs life-spans of peripheral cooling units (A/C,
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV
light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LED
and other sustainable business certifications.
9. Bright, even light
maintains consistent color over time.
10. Instant on/off – No flickering,
delays or buzzing.
11. Very good color rendering.
13. Significantly cooler operation.
14. Less frequent outages,
higher output improves workplace