Links will open in new windows.
Explosion Proof Lights:
Our line of explosion proof lights and explosion
proof LED lights represent the best in high quality explosion proof
View More Information
We carry an extensived line of LED lights
including LED light bars, explosion proof LEDs, LED lights for military
applications, boats, vehicles, security lighting and more.
Infrared LED Lights:
Infrared LED light emitters for covert
applications. Larson Electronics Infrared LED emitters are ideal for military and
security applications where a covert source of infrared light is
View More Information
We carry the full line of Golight remote
controlled spotlights and related accessories. Larson Electronics is the only source for
the Golight Stryker Remote Control Spotlight with magnetic base.
View More Information
Larson Electronics stocks a comprehensive line of
hunting lights and related accessories. Our hunting lights include rechargeable
handheld LED spotlights and HID spotlights with red lenses.
View More Information
Our HML series of spotlights have been tested
and approved for use by the Marines, Army, Navy, and Air Force and are part of
the military’s Special Forces' Escalation of Force Kits.
View More Information
24 Volt Lights:
Larson Electronics manufactures and stocks an
extensive line of 24 volt
lighting equipment that ranges from 12/24 volt spotlights and floodlights to
multimillion candlepower searchlights and industrial grade work
View More Information
Magnalite or Larson Electronics
Larson Electronics is a
manufacturer and distributor of industrial-commercial grade lighting products.
Larson Electronics carries an extensive line of lighting products including explosion proof lights, hazardous location lights, explosion proof paint spray booth lights, high power LED lights, remote control HID Golight spotlights, LED flashlights,
military spotlights, infrared LEDs, LED
boat lights and industrial light towers. Larson Electronics also
manufactures and distributes a wide range of HID high power spotlights and HID flashlights that are ideal for
use as military spotlights
and law enforcement searchlights as well as effective for use in the utility and emergency services
Larson Electronics products that are
particularly well suited to military and law enforcement applications include
police lights, unity post mount spotlights, unity roof mount lights, remote control Golight spotlights, remote control spotlights with magnetic bases, rechargeable spotlights,
rechargeable flashlights, led flashlights, high
intensity discharge military spotlights with magnetic
bases and magnetic tripods for
flashlights and spotlights. Larson Electronics manufactures and carries an extensive
line of military spotlights, floodlights, and military
grade lighting accessories and equipment.
Many of Larson Electronicss lighting
products can serve equally well in the public and private sector as hunting spotlights, boating spotlights, camping lights,
off-road and ATV lights, and infared security lights; this includes a wide array of LED lights and LED light bars that
can operate on a variety of voltages ranging from 9 to 42 VDC and can be mounted
on cars, trucks, boats and
Larson Electronics is a large distributor
of the Golight line of remote controlled spotlights and stocks
a comprehensive variety of HID or high intensity discharge Golights, Golight marine spotlights and searchlights, Golight floodlights,
military Golights and
a wide array of camouflage Golights for hunting and
off-road use. Larson Electronics is the only source for the Golight Stryker Remote Control Spotlight with magnetic
base and offers a wide variety of mounting
options for both the Golight Stryker and
Golight RadioRay series of spotlights.
Larson Electronics develops and stocks a wide
range of explosion proof lights and products as well as intrinsically safe lights and
intrinsically safe LED lights. Larson Electronics’s explosion proof line of lights carry the required
explosion proof certifications and approvals and are U.L. certified for use in
hazardous locations according to their respective class, division and zone
ratings. Larson Electronicss hazardous location lighting includes explosion proof fluorescent lights
for paint spray booths, Class 1 Div 1 flashlights and intrinsically safe lights, portable and cart mounted tank lights, explosion proof droplights,
explosion proof LED lights and intrinsically safe flashlights.
Larson Electronics regularly develops and
manufactures new additions to its line of explosion proof lighting and industrial grade lighting products and is proud to offer the latest
in explosion proof LED lighting and explosion proof paint spray booth lighting. Larson Electronics also manufactures a wide array of military and
law enforcement related accessories including the concealable, back up universal handcuff key (plastic handcuff key)
used by Air Force pilots, Navy SPAWAR, Navy Seals and Special Operations
military personnel to effect escape in hostage or prisoner
can also call us toll free at 1-800-369-6671. Purchase orders
can be faxed to us at 903-498-3364 Larson Electronics can provide
detailed technical information regarding any of its products and is capable of
working with customers to create unique lighting solutions to suit their needs
If you have any questions or special
requirements regarding any of our industrial grade lighting solutions please
contact us by E-mail at
Larson Electronics manufactures the
Larson Electronics 12 volt spotlights with magnetic base and 12 volt searchlights with magnetic base with magnetic bases and 16 foot cords in Dallas, TX. These
industrial grade 12 volt spotlights
have been a staple of the cable, telephone and electric utility industry since
1967. Larson Electronics has since its beginnings expanded this to include the military/law enforcement
industries, federal and local governments, and emergency and first responder industries as well.
We carry a complete line of
HID off road and HID
equipment lights, including the Acro Light line.
HID flood lights with
permanent and magnetic mount options work on 12 and 24 volt DC systems and
provide illumination that extends 250 feet. The permanent mount and magnetic
mount HID spotlights project a beam to 3000 feet.
Larson Electronics is a
manufacturer and as such we maintain a large available inventory of our magnetic
mount spotlights, HID spotlights. HID flashlights and
the Golight Stryker and Golight Radioray remote controlled spotlights, battery
operated flashing strobe lights, LED flashlights and
LED headlamps. Because of our extensive inventory and "make to order" capacity,
nearly all orders for spotlights and flashlights received before 4 PM CT are
shipped same day via UPS.
Many of our professional grade
spotlights and flashlights make excellent gifts for him or gifts for men. Remote
controlled spotlights with magnetic base, military spotlights, handheld
spotlights, vehicle mount spotlights, rechargeable spotlights, rechargeable flashlights, hunting spotlights, hunting searchlights
and state of the art hid flashlights all
make fine christmas gifts for men, and are sure to please even the most
discriminating friends and family.
Larson Electronics' Larson Electronics can also
be viewed in these languages - Arabic Spanish Japanese Italian Portuguese Russian French.
Contact us at sales@magnalight
.com or call us toll free at 1-800-369-6671 for mor
information regarding any of our products. Purchase orders can be faxed to us at
903-498-3364 Larson Electronics can provide detailed technical
information regarding any of its products and is capable of working with
customers to create unique lighting solutions to suit their needs and
Larson Electronics Links
Follow Larson Electronics on
Explosion Proof Light - Base Stand Mount - 16 Inch - 150 Watt LED - Class I Div 1 C&D
Part # EPL-16BS-1X150LED-100 Price:
Hoja de Especificaciones
The EPL-16BS-1X150LED-100 Explosion
Proof LED Light from Larson Electronics is rated Class I Division 1-2 Groups C
& D and Class II Division 1-2 and uses a 16 inch LED light head to produce
17,500 lumens of light while drawing only 150 watts.
EPL-16BS-1X150LED-100 explosion proof LED light provides 10,000 square feet of
work area coverage with 17,500 lumens of light output. This portable LED light
is mounted to a four leg aluminum base and has an LED light head measuring 16
inches wide by 14 inches tall. The LED light head on this unit produces a
brilliant flood pattern of light that is ideal for illuminating enclosed areas
and hazardous locations where flammable vapors, gases and dusts may be present.
Often referred to as simply a “tank light,” this unit is considered universal
due to its ability to be passed through any conventional manhole such as those
found in petrochemical containers and ship storage tanks.
Click Photo to
Click Photo to
Click Photo to
LED light head is offered in a 60° narrow flood for greater distance and a 125°
wide flood that produces a brilliant flood pattern of light that is ideal for
illuminating enclosed areas and further adds to this units desirability as a
portable tank lighting solution. This explosion proof LED light fixture is
comprised of a 16 inch LED light head mounted atop a base stand fabricated from
non sparking aluminum. Transferring the unit through manholes consists of simply
removing the light head from the base, passing the light head and base through
the manhole separately, and then reassembling the unit once inside. The lamp can
be easily adjusted up or down 90 degrees and locked into position by simply
loosening the two hand screws located on either side of the light head and
retightening them once the desired angle is found. Included with this LED light
cart is 100 feet of SOOW cord, which combined with the 360° of rotation and 90°
of tilt offered by the LED light head provides an effective alternative to often
cumbersome explosion proof string lights.
explosion proof LED light head in this unit features multiple LED drivers which
helps to increase the operational life of the fixture. With
traditional LED lights, in the event an LED array or driver fails, the entire
fixture no longer illuminates. This new series of LED lamps
contains twelve individual LED boards
configured in a series of banks. Each bank contains two LED boards with an
individual driver. In the event of a driver failure, only one bank of LEDs will
be effected while the other banks will continue to operate. In the event that of
an LED failure, the mating LED will continue to operate.
Unlike gas burning and arc type
lamps that have glass bulbs, LEDs have no filaments or fragile housings to break
during operation. Instead of heating a small filament or using a combination of
gases to produce light, light emitting diodes (LEDs) use semi-conductive
materials that illuminate when electric current applied and emitting light. With
LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED
technology. By nature, LED light sources run significantly cooler than
traditional lamps, reducing the chance of accidental burns and increased
temperatures due to heat emissions. This solid state design of light emitting
diodes provides a more reliable, stable, durable, and energy efficient light
source over traditional lighting.
Safety within the workplace is
another benefit of LED work lights and temporary lighting. All light sources
produce heat. With traditional work lamps, such as incandescent and halogen
light sources, the lamp reaches high surface temperatures. These surface
temperatures introduce a burn risk to anyone to anyone that allows prolonged
skin contact with the light source, as well as a fire hazard if a flammable
material is accidentally set too close to the light source for an extended
period of time. While LED fixtures do still produce heat, they are designed with
heat sinks to properly disperse the heat. Each LED bulb is engineered to
disperse and expel this heat quickly and efficiently, keeping the lamp cooler
than traditional light sources. This explosion proof LED work light operates at
a lower surface temperature than a comparable model with traditional light
source, and thus does not present a significant burn risk if an operator or
bystander accidentally brushed up against an exposed lamp, and reduce the fire
hazard should they fixture accidentally come in contact with a flammable
material for a short period of time. This significantly increases the safety
within the work environment.
Click Photos to
5-15 Straight Blade Plug
5-20 Straight Blade
6-20 Straight Blade
explosion proof flood light is equipped with 100 foot of 16/3 chemical and
abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for
easy connection to common wall outlets. Plug options include 5-15P 15 amp
straight blade plug for 110-125V explosion proof outlets, explosion proof 5-20P
20 amp straight blade plug for 110-125V explosion proof outlets, or explosion
proof 6-20P 20 amp straight blade plug for 220-250V explosion proof
tank light is universal voltage and is configured to operate on 120-277 volts
50/60 Hz. Further adding to the versatility and convenience of this explosion
proof LED light are 25 peel off mylar overspray lamp protectors that ship with
the unit. The protectors provide lamp protection from dirt or debris and can be
removed, cleaned and replaced, lessening the need for tedious lamp cleaning or
replacements. This lamp is T5 temperature rated and the LED light head retains
80% of its lumen output after 60,000 hours of use, far longer than incandescent
or fluorescent lamps.
|Made in USA
1. Approved Class I Div1-2 Class II Div I-2
Led lamp head requires no lamping.
3. Durable Base Mount constructed of
copper free aluminum.
4. No ballast box. No ballast to replace.
Extreme long life LEDs reduce maintenance and replacement costs.
Adjustable LED light head.
7. 25 peel off mylar overspray lamp protectors
ship with the unit.
8. 17,500 Lumens produced from only 150 watts.
Mercury free shock proof LED lamp light head.
1. 60,000+ hour lifespan.
2. Can SAVE 50% or
more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
UV light, infrared radiation or CO2 emissions.
6. Bright, even light
maintains consistent color over time.
7. Instant on/off – No flickering,
delays or buzzing.
8. Very good color rendering.
10. Significantly cooler operation.
11. Less frequent outages,
higher output improves workplace
Specifications / Additional
Explosion Proof LED Light
Scroll Down to
United States & Canada
||Class I Division 1, Groups C and D|
||Class I Division 2, Group A,B,C,D|
|Dimensions: 14" x 16" Light head
||Class II, Divisions 1 & 2, Groups E,F,G|
||Class III, Divisions 1 & 2|
|Voltage: Universal Voltage 120-277V AC 50/60Hz
||T5 Temperature Rating|
|Total Watts: 150 watts
||Certified to UL844 and C22.2 Standards|
|Total Lumens: 17,500
||Paint Spray Booth Approved|
|Luminous Efficacy: 11.67 Lm/W
|LED Lamp Life Expectancy:
||IP67 Rated Waterproof|
||Multiple Driver Banks|
Index: >75 CRI
||80% Lumen Retention after 60,000 Hours|
|Beam Lux: 8500@ 1 Meter 1250@ 3 Meters
||Made in the USA |
|Ambient Operating Temp
Range:-40°C to 65°C
Range: T5 Rated
|Mounting: Aluminum Base Stand
||Contact us for special requirements |
SOOW Cord Explosion Proof Straight Blade Plug
||Toll Free: 1-800-369-6671|
5-15 Straight Blade Plug, 5-20 Straight Blade Plug,
6-20 Straight Blade
|Warranty:Yes - 5 Years* - 10 Year / 100,000 Lumen Available**
*5 year warranty replacement on this LED light (or
LED bulbs for light fixtures with removable LED bulbs). After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson Electronics at
their expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt, Larson
Electronics will provide a return label via email to the customer. When the
failed light is returned, Larson Electronics will ship a new replacement. Please click here to see our 5 Year Warranty
**10 year / 100,000 hour warranty available for
this product. For more information, please click here
9.5 / 10
14422 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
Voltage Drop in Low Voltage Lighting Systems
Because of the risks associated with flammable gases, dusts, and particles in hazardous work areas, low voltage lighting systems are a natural choice to increase safety in areas where the potential for combustion exists. This becomes especially challenging when lights must be run at long distances with limited power sources. Low voltage systems typically run on 12-24 volts DC, but even within this lower range, a precise balance between distance, wattage load, and correct wire gauge must be [...]
Benefits and Applications of Explosion Proof LED Lighting in Confined Spaces
The complex and hazardous nature of confined spaces present numerous risks for workers. Because of this, many businesses that operate in hazardous locations make use of explosion proof lights to prevent the ignition of flammable gases and dust particles. LED technology has contributed to the features of explosion proof lights by making them more reliable, sturdy and cost-effective. [...]
The Future of Lighting: No More Lamp Servicing or Maintenance?
While on the one hand we are seeing a shift towards an integrated LED lamp/fixture modality, there does exist the potential for a “modular” approach to LED manufacture. This sounds contradictory, but let us explain in a little more detail. While an integrated LED/fixture design is indeed the probable route of future lighting design, the actual totality of an LED based luminaire is based on a combination of several distinct parts or “modules”. LEDs themselves are only represented by the “chip”; t [...]
Basics of Hazardous Location Confined Space Lighting
The terms explosion proof and intrinsically safe refer to different types of electrical equipment which have been designed specifically to be used in locations where potential flammable or explosive atmospheres are present. Explosion proof equipment is generally higher powered and designed to prevent any ignitions within the lamp from igniting the atmosphere outside the lamp. Foe example, if gases enter into the lamp housing and are ignited by a spark, the lamp contains the ignited gases long e [...]