Links will open in new windows.
Explosion Proof Lights:
Our line of explosion proof lights and explosion
proof LED lights represent the best in high quality explosion proof
View More Information
We carry an extensived line of LED lights
including LED light bars, explosion proof LEDs, LED lights for military
applications, boats, vehicles, security lighting and more.
Infrared LED Lights:
Infrared LED light emitters for covert
applications. Larson Electronics Infrared LED emitters are ideal for military and
security applications where a covert source of infrared light is
View More Information
We carry the full line of Golight remote
controlled spotlights and related accessories. Larson Electronics is the only source for
the Golight Stryker Remote Control Spotlight with magnetic base.
View More Information
Larson Electronics stocks a comprehensive line of
hunting lights and related accessories. Our hunting lights include rechargeable
handheld LED spotlights and HID spotlights with red lenses.
View More Information
Our HML series of spotlights have been tested
and approved for use by the Marines, Army, Navy, and Air Force and are part of
the military’s Special Forces' Escalation of Force Kits.
View More Information
24 Volt Lights:
Larson Electronics manufactures and stocks an
extensive line of 24 volt
lighting equipment that ranges from 12/24 volt spotlights and floodlights to
multimillion candlepower searchlights and industrial grade work
View More Information
Magnalite or Larson Electronics
Larson Electronics is a
manufacturer and distributor of industrial-commercial grade lighting products.
Larson Electronics carries an extensive line of lighting products including explosion proof lights, hazardous location lights, explosion proof paint spray booth lights, high power LED lights, remote control HID Golight spotlights, LED flashlights,
military spotlights, infrared LEDs, LED
boat lights and industrial light towers. Larson Electronics also
manufactures and distributes a wide range of HID high power spotlights and HID flashlights that are ideal for
use as military spotlights
and law enforcement searchlights as well as effective for use in the utility and emergency services
Larson Electronics products that are
particularly well suited to military and law enforcement applications include
police lights, unity post mount spotlights, unity roof mount lights, remote control Golight spotlights, remote control spotlights with magnetic bases, rechargeable spotlights,
rechargeable flashlights, led flashlights, high
intensity discharge military spotlights with magnetic
bases and magnetic tripods for
flashlights and spotlights. Larson Electronics manufactures and carries an extensive
line of military spotlights, floodlights, and military
grade lighting accessories and equipment.
Many of Larson Electronicss lighting
products can serve equally well in the public and private sector as hunting spotlights, boating spotlights, camping lights,
off-road and ATV lights, and infared security lights; this includes a wide array of LED lights and LED light bars that
can operate on a variety of voltages ranging from 9 to 42 VDC and can be mounted
on cars, trucks, boats and
Larson Electronics is a large distributor
of the Golight line of remote controlled spotlights and stocks
a comprehensive variety of HID or high intensity discharge Golights, Golight marine spotlights and searchlights, Golight floodlights,
military Golights and
a wide array of camouflage Golights for hunting and
off-road use. Larson Electronics is the only source for the Golight Stryker Remote Control Spotlight with magnetic
base and offers a wide variety of mounting
options for both the Golight Stryker and
Golight RadioRay series of spotlights.
Larson Electronics develops and stocks a wide
range of explosion proof lights and products as well as intrinsically safe lights and
intrinsically safe LED lights. Larson Electronics’s explosion proof line of lights carry the required
explosion proof certifications and approvals and are U.L. certified for use in
hazardous locations according to their respective class, division and zone
ratings. Larson Electronicss hazardous location lighting includes explosion proof fluorescent lights
for paint spray booths, Class 1 Div 1 flashlights and intrinsically safe lights, portable and cart mounted tank lights, explosion proof droplights,
explosion proof LED lights and intrinsically safe flashlights.
Larson Electronics regularly develops and
manufactures new additions to its line of explosion proof lighting and industrial grade lighting products and is proud to offer the latest
in explosion proof LED lighting and explosion proof paint spray booth lighting. Larson Electronics also manufactures a wide array of military and
law enforcement related accessories including the concealable, back up universal handcuff key (plastic handcuff key)
used by Air Force pilots, Navy SPAWAR, Navy Seals and Special Operations
military personnel to effect escape in hostage or prisoner
can also call us toll free at 1-800-369-6671. Purchase orders
can be faxed to us at 903-498-3364 Larson Electronics can provide
detailed technical information regarding any of its products and is capable of
working with customers to create unique lighting solutions to suit their needs
If you have any questions or special
requirements regarding any of our industrial grade lighting solutions please
contact us by E-mail at
Larson Electronics manufactures the
Larson Electronics 12 volt spotlights with magnetic base and 12 volt searchlights with magnetic base with magnetic bases and 16 foot cords in Dallas, TX. These
industrial grade 12 volt spotlights
have been a staple of the cable, telephone and electric utility industry since
1967. Larson Electronics has since its beginnings expanded this to include the military/law enforcement
industries, federal and local governments, and emergency and first responder industries as well.
We carry a complete line of
HID off road and HID
equipment lights, including the Acro Light line.
HID flood lights with
permanent and magnetic mount options work on 12 and 24 volt DC systems and
provide illumination that extends 250 feet. The permanent mount and magnetic
mount HID spotlights project a beam to 3000 feet.
Larson Electronics is a
manufacturer and as such we maintain a large available inventory of our magnetic
mount spotlights, HID spotlights. HID flashlights and
the Golight Stryker and Golight Radioray remote controlled spotlights, battery
operated flashing strobe lights, LED flashlights and
LED headlamps. Because of our extensive inventory and "make to order" capacity,
nearly all orders for spotlights and flashlights received before 4 PM CT are
shipped same day via UPS.
Many of our professional grade
spotlights and flashlights make excellent gifts for him or gifts for men. Remote
controlled spotlights with magnetic base, military spotlights, handheld
spotlights, vehicle mount spotlights, rechargeable spotlights, rechargeable flashlights, hunting spotlights, hunting searchlights
and state of the art hid flashlights all
make fine christmas gifts for men, and are sure to please even the most
discriminating friends and family.
Larson Electronics' Larson Electronics can also
be viewed in these languages - Arabic Spanish Japanese Italian Portuguese Russian French.
Contact us at sales@magnalight
.com or call us toll free at 1-800-369-6671 for mor
information regarding any of our products. Purchase orders can be faxed to us at
903-498-3364 Larson Electronics can provide detailed technical
information regarding any of its products and is capable of working with
customers to create unique lighting solutions to suit their needs and
Larson Electronics Links
Follow Larson Electronics on
18 Watt LED Bulb - 48 Inch Length - G13 T8 Style Tube - UL Listed - LEL Approved
Part # LEDT8-48-RP Price:
The Larson Electronics LEDT8-48-RP 18 watt T-series LED tube lamp is an excellent choice for upgrading existing T8 fluorescent lamp fixtures to LEDs as well as a direct replacement for our own LED light fixtures. This LED lamp is LEL listed, providing 125 lumens per watt for a total of 2,250 lumens per lamp. These T8 LED replacement lamps offer 50,000 hour lamp life, over twice that of T8 or T5HO fluorescent lamps, while offering impact and vibration resistance far exceeding traditional light sources.
This 18 Watt T-series LED Bulb works with any T8 fluorescent light fixtures, can be configured for any T series fluorescent lamp fixture with G13 bi-pin tombstones or sockets, and requires no ballast for operation. To increase safety during installation and routine maintenance, these lamps are wired for single sided power with internal integrated LED driver housed within the tube. Internally, you simply bring the black wire to one pin and the white wire to the other. The polycarbonate lens diffuses the light and makes this bulb ideal for food safe environments as there is no glass. The aluminum housing serves as a heat sink and provides rigidity and strength for this LED bulb. These LED light tubes can also be plugged directly into fluorescent light fixtures with magnetic ballasts, which makes them an ideal retrofit for older T12 fluorescent lights with magnetic ballasts.
In fluorescent light fixtures with electronic ballasts, the operator needs to bypass the ballast and wire the power directly to one end of the LED tube (black wire to one pin and white wire to the other). Thus, this is an ideal upgrade for 4 foot fixtures with failed ballasts. These LED fluorescent style bulbs are universal voltage and run directly off any voltage ranging from 100 volts to 277 volts AC 50/60 Hz. The internal LED driver is a "smart" driver, sensing the incoming voltage and adjusting accordingly to provide the current required by the lamp. This allows operators to simply wire the fixture to voltage within the 120-277V range, no modifications required. This includes commonly found voltages such as 120V 60Hz, 220V 50Hz, 240V 60Hz, and 277V 60Hz. We also offer a 12/24V AC/DC version for low voltage applications for AC or DC power. Low voltage fixtures require no modifications between 12V and 24V power sources, nor between alternating and direct current supply.
Click Photo to Enlarge
Click Photo to Enlarge |
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
The LEDT8-48-RP features specially designed rotating end caps. Fluorescent lamps provide a full 360° beam coverage around the lamp. Since most fluorescent fixtures require directional lighting, reflectors have to be used to bounce the light back towards the intended target area for illumination. LED lamps are directional, which eliminates the need for back mounted reflectors and reduces wasted and lost light. However, the tombstones for existing fixtures may position the face of the LED lamp in a direction facing away from the target illumination area. With the rotating pins, operators can reposition the lamp so the face of the LED tube is positioned properly within existing fixtures. This also allows for fine tune adjustment of each individual lamp within fixtures containing multiple lamps.
These are the second generation of our 18 watt LED tubes. Efficiency for this LED lamp is 125 lumens per watt, for a total of 2,250 lumens per bulb. We offer a choice of 3000K warm white, 4500K natural white, and 5600K cool white color temperatures and clear, frosted, or heavy frosted lenses. The LEDT8 series of LED lamps are designed for direct replacement of 4ft fluorescent fixtures with G13 bases for replacing four foot T8, T8 high output, T12, T12 high output, and T12 very high output florescent lamps. Additionally, these lamps can be used in fixtures that currently use a G5 to G13 adapter socket using T5 lamps. Please note, this tube is 47" in length and will not fit properly in fixtures designed to accept 45" T5 lamps without adapters.
These LED fluorescent tube replacements can be used as upgrades or replacements to our own explosion proof fluorescent lights, explosion proof paint spray booth lights as well as any other T series light fixture the operator already has in house. We have specially designed these for our explosion proof light fixtures, however, they can be used as replacements in standard fluorescent light fixtures. In our facilities, we replaced worn or spent fluorescent bulbs with these LED bulbs by removing the ballasts and bringing the white wire to one end and the black wire to the other end of the LED tube.
LED Lamp Benefits|
1. 50,000 hour lifespan.
2. Can SAVE 50% or more on energy.
3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.
4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LEED and other sustainable business certifications.
9. Bright, even light maintains consistent color over time.
10. Instant on/off – No flickering, delays or buzzing.
11. Very good color rendering.
12. Vibration/impact resistant.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.
15. Brings out natural appearance of products in sales or manufacturing applications.
16. Preserves integrity of retail products... no heat damage to formulations or thermal fade of branded packaging in display cases.
17. Unlimited indoor applications for overhead lighting, retail fixtures, signage, custom lighting accents, manufacturing and general area illumination.
18. Easily retrofit existing conventional light fixtures, simplifies troffers since no ballasts. needed Durable enough for portable use in exhibitions and trade shows.
Specifications / Additional
|LEDT8-48-RP 18 watt T-series Fluorescent Style LED Tube
Scroll Down to Purchase
|Listing: United States & Canada
||Listed for United States and Canada|
|Lamp Type: LED T8-Style Tube
|Base: G13 Bi-Pin
|Dimensions: 47"-L x 1.03"-OD
||CAN/CSA C22.2 No 137|
|Weight: 0.77 lbs (350 grams)
||CAN/CSA C22.2 No 137 CLS|
|Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC
||125 lm/w efficiency|
|Watts: 18 watts
||Certified to Canadian Standards|
|Total Lumens: 2,250
|Luminous Efficiency: 125 lm/w
||80% Lumen Retention @ 50,000+ Hours|
|Lamp Life Expectancy: 50,000+ Hours
|Color Temperature: 3000K, 4500K or 5600K
||Single End Powered|
|Color Rendering Index: >80
|Beam angle: 150°
|Lighting Configuration: Flood Pattern
|Lens: Clear, Frosted, Heavy Frosted
|Power Efficiency: 90%
|Power Factor: >0.95
||Special Orders- Requirements|
|Ambient Temperature Rating: -40°C to +65°C
||Contact us for special requirements |
|Materials: Aluminum Housing, Polycarbonate Lens
||Toll Free: 1-800-369-6671|
|Ingress Protection: IP20
|Warranty: 5 Years*
*5 year warranty replacement on this LED light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Please click here to see our 5 Year Warranty pamphlet.
9.5 / 10
14247 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
Can LEDs Replace the Venerable Fluorescent Tube?
LEDs are solid state in their design and have no glass or gases used in their construction. They resemble circuitry more than they do a lamp, and are typically very resistant to damage from vibrations and impacts that would shatter normal bulbs. LEDs also have no toxic materials to release in the event they are damaged, making them an attractive alternative for many consumers to the fluorescent if only for this reason.