Links will open in new windows.
Explosion Proof Lights:
Our line of explosion proof lights and explosion
proof LED lights represent the best in high quality explosion proof
View More Information
We carry an extensived line of LED lights
including LED light bars, explosion proof LEDs, LED lights for military
applications, boats, vehicles, security lighting and more.
Infrared LED Lights:
Infrared LED light emitters for covert
applications. Larson Electronics Infrared LED emitters are ideal for military and
security applications where a covert source of infrared light is
View More Information
We carry the full line of Golight remote
controlled spotlights and related accessories. Larson Electronics is the only source for
the Golight Stryker Remote Control Spotlight with magnetic base.
View More Information
Larson Electronics stocks a comprehensive line of
hunting lights and related accessories. Our hunting lights include rechargeable
handheld LED spotlights and HID spotlights with red lenses.
View More Information
Our HML series of spotlights have been tested
and approved for use by the Marines, Army, Navy, and Air Force and are part of
the military’s Special Forces' Escalation of Force Kits.
View More Information
24 Volt Lights:
Larson Electronics manufactures and stocks an
extensive line of 24 volt
lighting equipment that ranges from 12/24 volt spotlights and floodlights to
multimillion candlepower searchlights and industrial grade work
View More Information
Magnalite or Larson Electronics
Larson Electronics is a
manufacturer and distributor of industrial-commercial grade lighting products.
Larson Electronics carries an extensive line of lighting products including explosion proof lights, hazardous location lights, explosion proof paint spray booth lights, high power LED lights, remote control HID Golight spotlights, LED flashlights,
military spotlights, infrared LEDs, LED
boat lights and industrial light towers. Larson Electronics also
manufactures and distributes a wide range of HID high power spotlights and HID flashlights that are ideal for
use as military spotlights
and law enforcement searchlights as well as effective for use in the utility and emergency services
Larson Electronics products that are
particularly well suited to military and law enforcement applications include
police lights, unity post mount spotlights, unity roof mount lights, remote control Golight spotlights, remote control spotlights with magnetic bases, rechargeable spotlights,
rechargeable flashlights, led flashlights, high
intensity discharge military spotlights with magnetic
bases and magnetic tripods for
flashlights and spotlights. Larson Electronics manufactures and carries an extensive
line of military spotlights, floodlights, and military
grade lighting accessories and equipment.
Many of Larson Electronicss lighting
products can serve equally well in the public and private sector as hunting spotlights, boating spotlights, camping lights,
off-road and ATV lights, and infared security lights; this includes a wide array of LED lights and LED light bars that
can operate on a variety of voltages ranging from 9 to 42 VDC and can be mounted
on cars, trucks, boats and
Larson Electronics is a large distributor
of the Golight line of remote controlled spotlights and stocks
a comprehensive variety of HID or high intensity discharge Golights, Golight marine spotlights and searchlights, Golight floodlights,
military Golights and
a wide array of camouflage Golights for hunting and
off-road use. Larson Electronics is the only source for the Golight Stryker Remote Control Spotlight with magnetic
base and offers a wide variety of mounting
options for both the Golight Stryker and
Golight RadioRay series of spotlights.
Larson Electronics develops and stocks a wide
range of explosion proof lights and products as well as intrinsically safe lights and
intrinsically safe LED lights. Larson Electronics’s explosion proof line of lights carry the required
explosion proof certifications and approvals and are U.L. certified for use in
hazardous locations according to their respective class, division and zone
ratings. Larson Electronicss hazardous location lighting includes explosion proof fluorescent lights
for paint spray booths, Class 1 Div 1 flashlights and intrinsically safe lights, portable and cart mounted tank lights, explosion proof droplights,
explosion proof LED lights and intrinsically safe flashlights.
Larson Electronics regularly develops and
manufactures new additions to its line of explosion proof lighting and industrial grade lighting products and is proud to offer the latest
in explosion proof LED lighting and explosion proof paint spray booth lighting. Larson Electronics also manufactures a wide array of military and
law enforcement related accessories including the concealable, back up universal handcuff key (plastic handcuff key)
used by Air Force pilots, Navy SPAWAR, Navy Seals and Special Operations
military personnel to effect escape in hostage or prisoner
can also call us toll free at 1-800-369-6671. Purchase orders
can be faxed to us at 903-498-3364 Larson Electronics can provide
detailed technical information regarding any of its products and is capable of
working with customers to create unique lighting solutions to suit their needs
If you have any questions or special
requirements regarding any of our industrial grade lighting solutions please
contact us by E-mail at
Larson Electronics manufactures the
Larson Electronics 12 volt spotlights with magnetic base and 12 volt searchlights with magnetic base with magnetic bases and 16 foot cords in Dallas, TX. These
industrial grade 12 volt spotlights
have been a staple of the cable, telephone and electric utility industry since
1967. Larson Electronics has since its beginnings expanded this to include the military/law enforcement
industries, federal and local governments, and emergency and first responder industries as well.
We carry a complete line of
HID off road and HID
equipment lights, including the Acro Light line.
HID flood lights with
permanent and magnetic mount options work on 12 and 24 volt DC systems and
provide illumination that extends 250 feet. The permanent mount and magnetic
mount HID spotlights project a beam to 3000 feet.
Larson Electronics is a
manufacturer and as such we maintain a large available inventory of our magnetic
mount spotlights, HID spotlights. HID flashlights and
the Golight Stryker and Golight Radioray remote controlled spotlights, battery
operated flashing strobe lights, LED flashlights and
LED headlamps. Because of our extensive inventory and "make to order" capacity,
nearly all orders for spotlights and flashlights received before 4 PM CT are
shipped same day via UPS.
Many of our professional grade
spotlights and flashlights make excellent gifts for him or gifts for men. Remote
controlled spotlights with magnetic base, military spotlights, handheld
spotlights, vehicle mount spotlights, rechargeable spotlights, rechargeable flashlights, hunting spotlights, hunting searchlights
and state of the art hid flashlights all
make fine christmas gifts for men, and are sure to please even the most
discriminating friends and family.
Larson Electronics' Larson Electronics can also
be viewed in these languages - Arabic Spanish Japanese Italian Portuguese Russian French.
Contact us at sales@magnalight
.com or call us toll free at 1-800-369-6671 for mor
information regarding any of our products. Purchase orders can be faxed to us at
903-498-3364 Larson Electronics can provide detailed technical
information regarding any of its products and is capable of working with
customers to create unique lighting solutions to suit their needs and
Larson Electronics Links
Follow Larson Electronics on
Larson Electronics Mega Light Tower - 16 X 1500W MH - 2,400,000 Lumens- 50' Height - Trailer Mounted
Part # WCDE-49-16X1500 Price:
Made in Texas
The WCDE-49-16X1500 Mega Tower 24000 from Larson Electronics is a high power lighting package powered by a 24kw brushless water cooled diesel generator. The sixteen 1500 watt metal halide lamps included with this unit produce a combined total of 2,400,000 lumens and will illuminate a 10+ acre area continuously without refueling for up to 27 hours.
The WCDE-49-16X1500 Mega Tower 24000 is a self contained, towable, high power light tower package that produces enough light to illuminate an area 10+ acres in size. This unit contains a water cooled diesel engine powering a 55KW generator, which supplies the current for sixteen 1,500 watt metal halide lights producing 150,000 lumens each, for a combined total of 2,400,000 lumens of light. This unit can run uninterrupted for up to 27 hours straight without refueling and includes a telescoping light mast which can elevate the sixteen metal halide lamps to a height of 58'. This light boom can be extended to 58' for maximum area coverage, and collapsed to 22' for applications where a footprint smaller is required. The tower is constructed of heat treated aluminum tubing with 2.69' foot of overlap per section. The mast is elevated using an included hydraulic ram, and extended to its full height using a trailer mounted air compressor.
This mobile floodlight package is ideal for large scale event illumination, construction, mining, industrial operations, and anywhere a mobile full power lighting system capable of extended operation is needed.
Genset: The WCDE-49-16X1500 mobile light tower includes a Perkins genset that houses a Perkins 1104D-44TG1 turbocharged diesel engine that powers the 55KW 120/240 brushless generator. This genset is liquid cooled and features a single phase generator with electric start ignition. The diesel generator runs at 1800 RPM. A 100 gallon fuel cell sits beside the genset and is equipped with an electric fuel delivery system. The fuel cell is constructed of single a heavy gauge steel single wall frame with internal anti-splash baffles. This genset features key operated electric starting, a twelve volt electrical system, liquid cooling, replaceable dry element air cleaner, and a full enclosure for safe operation and protection against the elements. This engine also features cold weather glow plugs to improve performance under cold weather conditions.
Lights: The lighting system on this unit is comprised of sixteen 1,500 watt metal halide lamps producing 150,000 lumens of light each attached to the end of the telescoping pneumatic light boom. These floodlights produce a wide flood light pattern capable of illuminating a minimum of 10 acres with a combined total of 24,000 watts and 2,400,000 lumens of light. The entire lighting assembly is connected to the power source via a precision light controller ballast and breaker box.
Click here to see the lighting layout comparison of the metal halide verses LED Megatower light plants from Larson Electronics.
Telescoping Boom: The pneumatic telescoping boom is constructed of heat treated aluminum with an powder coated finish and extends up 58' in height. This boom is raised from and lowered to the folded position by a single hydraulic ram, and extended or retracted by pnumaitc system with equipped air compressor.
Wiring/Controls: The light heads are grouped into banks of four. Each bank in wired into the NEMA 3R breaker control box at the base of the mast. Operators control the light heads via an on/off switched breaker per bank of four light heads. The air compressor and battery charger are also powered from within this breaker box. Power is provided to the control box via a 20' 10/4 SOOW whip with flying leads for connected to terminal mount gensets. Operators supply 240/120V or 208/120V (depending on the configuration) to the light plant. The mast elevation is controlled by a push button switch to operate the hydraulic ram, allowing operators to raise the mast to the upright position. The vertical deployment is operated by an up/down level, allowing operators to extend it to its full 50' height or retract it to the collapsed height.
The entire unit is mounted onto a four wheel, tandem axle trailer constructed of 8" box steel equipped with axles. Each axle is rated at 7,000 lbs and equipped with P235/80R16 tubeless tires and wheels. The rear axle is equipped with electric brakes. Tongue weight is rated at 650 lbs and an adjustable 3” lunnett eye for pintle hitches provides secure hookup to tow vehicles. A single 7,000 lbs rated tongue jack provides a stable connect-disconnect platform as well as additional stability during tower deployment. Standard heavy duty safety chains are included. This trailer also includes a front mounted storage area for stowing tools and accessories. The trailer is finished in industrial grade Dupont™ paint for protection against rust and corrosion and provides an attractive finish. Overall dimensions of the entire trailer and boom assembly in the stowed for travel configuration is 21' long by 7’ wide.
Six 7,000 lbs hand crank jacks are used for raising the trailer up off the ground, and four 7,000 lbs hand crank jacks mounted on extending outriggers are used for leveling and stabilizing the trailer assembly. Each of the four jacks are attached to a pivoting outrigger constructed of 6' by 6" by 6.3" steel I-beams. The jacks can be leveled by hand crank or attachment provided for power drills. These outriggers can be extended 6' out from the side of the trailer for added stability. This light plant can withstand 35 mph winds when fully extended. When lowered to 30', the mast can withstand 50 mph winds. When lowered to 22', the mast can withstand wind speeds up to 95 mph with gusts of 125 mph. Custom builds can be provided for higher wind speed resistance when fully raised.
We offer a choice of finishing, equipped light heads, and with or without gensets. These towers can be fitted with Larson Electronics line of high output light heads, or customize the mast head to meet the mounting requirements for your equipment. Optional diesel generators and fuel cells can be equipped from factory, or retrofitted after purchase.
Click Images to enlarge. |
The above images show a side by side comparison of the WCDE-46-16X1500 next to a 30' four lamp metal halide light plant.|
Cold Weather Package: The WCDE-49-16X1500 is designed to withstand extreme cold environments and harsh winters. The pneumatic system is equipped with a de-icing system to prevent the air compressor, air lines, and pneumatic mast from freezing from moisture building within the air system. This de-icing system uses an environmentally friendly (non-toxic) fluid. All air lines are equipped with cold weather rated hydraulic hoses rated for -65°C and fitted with metallic hardware. The air compress consists of an oil-less unit equipped with an aluminum air regulator, stainless steel ball valves, and stainless steel valve controls. The head of the air compressor is wrapped with heat trace to prevent the compressor from freezing over in subzero temperatures. All the pneumatic controls are housed within an insulated and weather tight enclosure. This pneumatic control box features 1/2" thick polystyrene foam insulation and heat trace.
The hydraulic system features -65°C cold weather rated rubber hydraulic hoses with metallic fittings and a cold weather rated high viscosity hydraulic fluid. The battery system that powers the hydraulic system features a cold weather rated sealed acid glass mat 12 volt battery wrapped in a heated battery blanket. A cold weather rated battery charger keeps the 12 volt battery charged. All battery components are enclosed within a NEMA 3R housing. All electrical components are wired using cold weather rated SOOW cable with rated to -50°C that features high flexibility, and extreme abrasion, acid, oil, and water resistance even in sub-zero climates.
Suggested Applications: Temporary lighting, construction sites, and security camera deployment. We can equip this mast with 1000W HID-22-SL-REM or 1500W HID-22-15M-SL-REM Metal Halide lights or a wide variety of high powered LED lights with comparable power, including the GAU-LTL-600W-LED, LED10WSA-320, LEDP5W-60, and GAU-HB-160LED.
Specifications / Additional Information
|WCDE-49-16X1500 Mega Tower 24000
Scroll Down to Purchase-
||2,400,000 Lumen Output|
|Engine: Perkins 1104D-44TG1
||Four Point Outrigger System|
|Engine Type: Vertical, liquid-cooled, 4-cycle diesel engine
||Powered Boom Deployment |
|Engine Speed: 1800 RPM
||Extreme Area Coverage|
|No. of Cylinders: 4
||55KW Perkins Brushless Genset|
||100 Gallon External Fuel Cell|
|Air Cleaner: Heavy Duty Replaceable Dry Element
||Cold Weather Package Factory Installed|
|Generator: 55KW Brushless
||Up to 27 Hour Continuous Operation|
|Voltage: 120/240V Single Phase
||58' Light Mast|
||High Output Metal Halide Lamps|
|Fuel Cell Capacity: 100 Gallons - External Tank w/ Anti-Splash Baffles
||Independently Adjustable Light Heads|
|Fuel Delivery: Electric
||Dial-in Adjustability per light head|
|Sound Level: 74 dB - Full load @ 23' away
||110 Lumens Per Watt Efficiency|
|Cold Weather Package: Glow Plugs
||Switched Breaker System per Lamp Head|
|Outlets: (1) 5-20RA (GFCI), (1) L5-30R, (1) L14-30R, (2) CS-6369
||Steel Trailer w/ Industrial Grade Paint Finish|
|6-Point Leveling Jack System|
|Light Mast Specs
||Made in the USA|
|Tower Length: 22' to 58'
|Lamp Qty: (16)
|Materials: Heat Treated 6063B/T5 Aluminum
|Finish: Powder Coated
|Operation: Pneumatic w/ Hydraulic Ram
|Lamp Type: Metal Halide
|Lamp Quantity: 16
|Total Watts: 24,000 (1,500W per lamp)
|Efficiency: 110 Lumens per Watt
|Total Lumens: 2,400,000
|Coverage: 10+ Acres
|Run Time: Up To 27 Hours on Single Tank of Fuel -Approximate
|Line-In Voltage: 240/120V or 208/120V
|Line-In Cable: 20' 10/4 SOOW Cable
|Panel: NEMA 3R w/ Breakers
|Trailer Dimensions: 21'-L x 7'-W trailer bed
|Height (Mast Collapsed & Upright): 21'-9/32"-H
|Height (Mast Extended): 58'-H
|Footprint (Outriggers Extended): 34'-3/4" x 12'-9/16"
|Hitch: 3" Lunnett
|Wiring: 7-Pin Flat
|Axles: 7,000 lbs w/ Electric Brakes
|Suspension: Leaf Spring
|Outriggers: (4) 6' x 6" x 6" I-Beams Retractable w/ (4) 7,000 lbs Manual Leveling
|Wheels: (4) 16" 5x4.5" Steel Rims
|Tires: (4) P235/80R16
|Special Orders- Requirements|
||Contact us for special requirements |
|Shipping: Common Freight
|Options: Length- Mounting-Fixtures/ Call Us for Special Requirements
|3 year warranty replacement on this light mast. The customer ships the failed light mast to Larson Electronics at their expense. If the failure is a manufacturer defect, we will repair and/or replace the unit.
9.47 / 10
16159 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
Basic Properties of High Power Light Towers
Light towers both portable and mobile can be fitted with a wide array of lighting assemblies. The most common lamp types used on portable towers are halogen lamps of 500 to 1,000 watts. Portable towers can also be fitted with metal halide lamps, but this necessitates the inclusion of ballast assemblies as well, increasing the towers weight and complexity somewhat. LED lamps have recently become quite popular on portable towers due to their smaller size, high output and efficiency, and extreme d [...]
Mobile Light Tower Options: Modern Outdoor Lighting Systems
For most mid to large scale worksites, the most popular light towers are by far mobile lighting systems mounted to towable trailers and equipped with their own diesel generators. These systems are ideal for continuous use, and depending upon the size of the generator capable of illuminating anywhere from three to ten acres effectively. Masts for these towers are generally folding or telescoping designs, with some incorporating a combination of both for both excellent height adjustment and compac [...]