Links will open in new windows.
Explosion Proof Lights:
Our line of explosion proof lights and explosion
proof LED lights represent the best in high quality explosion proof
View More Information
We carry an extensived line of LED lights
including LED light bars, explosion proof LEDs, LED lights for military
applications, boats, vehicles, security lighting and more.
Infrared LED Lights:
Infrared LED light emitters for covert
applications. Larson Electronics Infrared LED emitters are ideal for military and
security applications where a covert source of infrared light is
View More Information
We carry the full line of Golight remote
controlled spotlights and related accessories. Larson Electronics is the only source for
the Golight Stryker Remote Control Spotlight with magnetic base.
View More Information
Larson Electronics stocks a comprehensive line of
hunting lights and related accessories. Our hunting lights include rechargeable
handheld LED spotlights and HID spotlights with red lenses.
View More Information
Our HML series of spotlights have been tested
and approved for use by the Marines, Army, Navy, and Air Force and are part of
the military’s Special Forces' Escalation of Force Kits.
View More Information
24 Volt Lights:
Larson Electronics manufactures and stocks an
extensive line of 24 volt
lighting equipment that ranges from 12/24 volt spotlights and floodlights to
multimillion candlepower searchlights and industrial grade work
View More Information
Magnalite or Larson Electronics
Larson Electronics is a
manufacturer and distributor of industrial-commercial grade lighting products.
Larson Electronics carries an extensive line of lighting products including explosion proof lights, hazardous location lights, explosion proof paint spray booth lights, high power LED lights, remote control HID Golight spotlights, LED flashlights,
military spotlights, infrared LEDs, LED
boat lights and industrial light towers. Larson Electronics also
manufactures and distributes a wide range of HID high power spotlights and HID flashlights that are ideal for
use as military spotlights
and law enforcement searchlights as well as effective for use in the utility and emergency services
Larson Electronics products that are
particularly well suited to military and law enforcement applications include
police lights, unity post mount spotlights, unity roof mount lights, remote control Golight spotlights, remote control spotlights with magnetic bases, rechargeable spotlights,
rechargeable flashlights, led flashlights, high
intensity discharge military spotlights with magnetic
bases and magnetic tripods for
flashlights and spotlights. Larson Electronics manufactures and carries an extensive
line of military spotlights, floodlights, and military
grade lighting accessories and equipment.
Many of Larson Electronicss lighting
products can serve equally well in the public and private sector as hunting spotlights, boating spotlights, camping lights,
off-road and ATV lights, and infared security lights; this includes a wide array of LED lights and LED light bars that
can operate on a variety of voltages ranging from 9 to 42 VDC and can be mounted
on cars, trucks, boats and
Larson Electronics is a large distributor
of the Golight line of remote controlled spotlights and stocks
a comprehensive variety of HID or high intensity discharge Golights, Golight marine spotlights and searchlights, Golight floodlights,
military Golights and
a wide array of camouflage Golights for hunting and
off-road use. Larson Electronics is the only source for the Golight Stryker Remote Control Spotlight with magnetic
base and offers a wide variety of mounting
options for both the Golight Stryker and
Golight RadioRay series of spotlights.
Larson Electronics develops and stocks a wide
range of explosion proof lights and products as well as intrinsically safe lights and
intrinsically safe LED lights. Larson Electronics’s explosion proof line of lights carry the required
explosion proof certifications and approvals and are U.L. certified for use in
hazardous locations according to their respective class, division and zone
ratings. Larson Electronicss hazardous location lighting includes explosion proof fluorescent lights
for paint spray booths, Class 1 Div 1 flashlights and intrinsically safe lights, portable and cart mounted tank lights, explosion proof droplights,
explosion proof LED lights and intrinsically safe flashlights.
Larson Electronics regularly develops and
manufactures new additions to its line of explosion proof lighting and industrial grade lighting products and is proud to offer the latest
in explosion proof LED lighting and explosion proof paint spray booth lighting. Larson Electronics also manufactures a wide array of military and
law enforcement related accessories including the concealable, back up universal handcuff key (plastic handcuff key)
used by Air Force pilots, Navy SPAWAR, Navy Seals and Special Operations
military personnel to effect escape in hostage or prisoner
can also call us toll free at 1-800-369-6671. Purchase orders
can be faxed to us at 903-498-3364 Larson Electronics can provide
detailed technical information regarding any of its products and is capable of
working with customers to create unique lighting solutions to suit their needs
If you have any questions or special
requirements regarding any of our industrial grade lighting solutions please
contact us by E-mail at
Larson Electronics manufactures the
Larson Electronics 12 volt spotlights with magnetic base and 12 volt searchlights with magnetic base with magnetic bases and 16 foot cords in Dallas, TX. These
industrial grade 12 volt spotlights
have been a staple of the cable, telephone and electric utility industry since
1967. Larson Electronics has since its beginnings expanded this to include the military/law enforcement
industries, federal and local governments, and emergency and first responder industries as well.
We carry a complete line of
HID off road and HID
equipment lights, including the Acro Light line.
HID flood lights with
permanent and magnetic mount options work on 12 and 24 volt DC systems and
provide illumination that extends 250 feet. The permanent mount and magnetic
mount HID spotlights project a beam to 3000 feet.
Larson Electronics is a
manufacturer and as such we maintain a large available inventory of our magnetic
mount spotlights, HID spotlights. HID flashlights and
the Golight Stryker and Golight Radioray remote controlled spotlights, battery
operated flashing strobe lights, LED flashlights and
LED headlamps. Because of our extensive inventory and "make to order" capacity,
nearly all orders for spotlights and flashlights received before 4 PM CT are
shipped same day via UPS.
Many of our professional grade
spotlights and flashlights make excellent gifts for him or gifts for men. Remote
controlled spotlights with magnetic base, military spotlights, handheld
spotlights, vehicle mount spotlights, rechargeable spotlights, rechargeable flashlights, hunting spotlights, hunting searchlights
and state of the art hid flashlights all
make fine christmas gifts for men, and are sure to please even the most
discriminating friends and family.
Larson Electronics' Larson Electronics can also
be viewed in these languages - Arabic Spanish Japanese Italian Portuguese Russian French.
Contact us at sales@magnalight
.com or call us toll free at 1-800-369-6671 for mor
information regarding any of our products. Purchase orders can be faxed to us at
903-498-3364 Larson Electronics can provide detailed technical
information regarding any of its products and is capable of working with
customers to create unique lighting solutions to suit their needs and
Larson Electronics Links
Follow Larson Electronics on
Explosion Proof LED Lights on Cart w/ Wheels - 4 foot, 4 LED lamps - Paint Spray Booth Certified
Part # EPLC-48-4L-LED Price:
Hoja de Especificaciones
Made in the USA
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHT CART*
The Larson Electronics EPLC-48-4L-LED Explosion Proof LED Light Cart is U.S./Canada U.L. approved Class 1 Division 1, Class 2 Division 1 and offers exceptional LED lamp durability, efficiency, 50,000 hour lamp life, and versatile explosion proof protection for operators working in hazardous locations.
The EPLC-48-4L-LED explosion proof light cart is UL listed Class 1 Division 1 and Class 2 Division 1 & 2 and offers the ability to quickly and easily add light wherever it is needed. This unit incorporates our highly effective EPL-48-4L-LED explosion proof fixture equipped with four 24 Watt LED T-series tube lights into a mobile platform. The platform is constructed of corrosion resistant aluminum alloy, has non sparking casters, and includes a Class 1 Div 1 Explosion Proof Switch with 50 foot of SOOW electric cable as well. This T6 temperature rated explosion proof LED light cart offers superior LED benefits in the form of reduced operating and maintenance costs, extreme lamp life, and high resistance to impacts and vibration.
This unit is an excellent lighting solution for operators who need full power illumination in areas where traditional fixed mount lighting is obstructed or cannot effectively reach.
There is no ballast in this unit and the included LED T-series lamps have a 50,000+ hour service life, both of which result in extreme efficiency, cooler operation and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs. The lamps are protected by heat and impact resistant Pyrex tubes which provide added security against impacts and overspray. The light fixture is constructed of copper free aluminum alloy and the entire unit ships with a 50' SOOW cord and explosion proof plug. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss 93% reflective finish. The cart allows the entire fixture to be adjusted through 270 degrees of rotation to position the lights as needed.
These LED-T series 24 watt LED lamps produce more illumination per watt than standard T8 bulbs, but draw only 3/4 of current. A standard EPL-48-4L-T8 explosion proof fluorescent light, with a combined total of 128 watts, draws 1.07 amps @ 120 volts. The LED version of the same light, with a total of 96 watts, draws only 0.9 amps. The EPLC-48-4L-LED is multi-voltage (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. The unit is also offered in low voltage to accommodate those who need voltage on 12 and 24 volts dc. An explosion proof switch comes standard with the EPLC-48-4L-LED, allowing for simple turning on/off while in a hazardous area.
Suggested Applications: PAINT SPRAY BOOTHS, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.
|Made in USA Quality
||Superior LED Benefits|
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets allow the light fixture to be rotated while on the cart through a wide degree of positions for optimal light placement.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.
4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the “tap and knock off” method to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.
8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.
1. Extreme long life.
2. High efficiency and low amp draw.
3. High durability and reliability.
4. Small size and light weight.
5. 100% recyclable.
6. No toxins-lead, mercury.
7. High light output..
8. Consistent color over time.
9. High Versatility.
10. No fragile glass used in construction.
12. Vibration/impact resistant.
5” non sparking casters
Frame constructed of corrosion resistant aluminum
Adjustable fixture brackets to 270 degrees
50 foot SOOW electric cable
Class I, Div I Explosion Proof Switch
Specifications / Additional Information
|EPLC-48-4L-LED Explosion Proof
Scroll Down to Purchase-
|UL Listing: United States - Canada
||Class 1 Division 1, Groups C and D|
|Dimensions: W-30 " L-58 " H-35.5 "
||Class 1 Division 2, Group A,B,C,D|
|Total Unit Weight: 115 Lbs
||UL 595 Outdoor Marine Type (Saltwater)|
|Total Watts: 96 watts
||UL 844, 924|
|Voltage: 120V-60hz 220V-50hz 240V-60hz 277V-60hz: low voltage available, 12 or 24 volts dc.
||UL 1598 Marine Type|
|Total Lumens: Led-T series Bulbs 14,000
||Class II Division 1- 2, Groups E,F,G |
|Lamp Life Expectancy: Led-T series Bulbs 50,000+ Hours
||UL Certified Canadian Standards|
|Efficiency: Led-T series Bulbs 90 Lumens per Watt
||UL listed for Paint Spray Booths*|
|Temp Range: T6 Rated* -40C - 85C
|Beam Angle: 150 degrees
||Special Orders- Requirements|
|Minimum Operating Temp: -30 C
||Contact us for special requirements |
|Maximum Case Temp: 90 C
|Color Temp: 5300K-
||Toll Free: 1-800-369-6671|
|Mounting: Portable Cart with Adjustable Brackets
|Wiring: 50ft SOOW cord
U.L Approval: U.S Certificate Canada Certificate
*5 year warranty replacement on this LED light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.
Click here to view the Explosion Proof Light Design Description|
9.43 / 10
18004 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
Voltage Drop in Low Voltage Lighting Systems
Because of the risks associated with flammable gases, dusts, and particles in hazardous work areas, low voltage lighting systems are a natural choice to increase safety in areas where the potential for combustion exists. This becomes especially challenging when lights must be run at long distances with limited power sources. Low voltage systems typically run on 12-24 volts DC, but even within this lower range, a precise balance between distance, wattage load, and correct wire gauge must be [...]
Benefits and Applications of Explosion Proof LED Lighting in Confined Spaces
The complex and hazardous nature of confined spaces present numerous risks for workers. Because of this, many businesses that operate in hazardous locations make use of explosion proof lights to prevent the ignition of flammable gases and dust particles. LED technology has contributed to the features of explosion proof lights by making them more reliable, sturdy and cost-effective. [...]
Paint Spray Booth Lighting: Why Use Third Party Booths?
In order for a spray booth to be truly effective however, it must have the correct lighting. While at first glance booth lighting might not seem like such an involved subject, a closer look at just what constitutes effective spray booth light reveals a different and more complex appearance. Booth lighting is critical because it directly affects the ability of the operator to apply a quality finish. Good lighting allows an operator to easily note variations in finish color as well as finish text [...]
The Future of Lighting: No More Lamp Servicing or Maintenance?
While on the one hand we are seeing a shift towards an integrated LED lamp/fixture modality, there does exist the potential for a “modular” approach to LED manufacture. This sounds contradictory, but let us explain in a little more detail. While an integrated LED/fixture design is indeed the probable route of future lighting design, the actual totality of an LED based luminaire is based on a combination of several distinct parts or “modules”. LEDs themselves are only represented by the “chip”; t [...]
Basics of Hazardous Location Confined Space Lighting
The terms explosion proof and intrinsically safe refer to different types of electrical equipment which have been designed specifically to be used in locations where potential flammable or explosive atmospheres are present. Explosion proof equipment is generally higher powered and designed to prevent any ignitions within the lamp from igniting the atmosphere outside the lamp. Foe example, if gases enter into the lamp housing and are ignited by a spark, the lamp contains the ignited gases long e [...]
Savings and Incentives for Lighting Upgrades
The incandescent light bulb will be obsolete for all but the most minor lighting applications, LED lighting will have the lion’s share of the lighting markets, and energy efficiency standards and alternative lighting technologies will continue to evolve and grow as well. [...]
Basics of Selecting Effective Paint Booth Lighting
The lighting of choice for most paint booths is standard four foot long fluorescent bulbs, usually arranged in fixtures containing either two or four bulbs grouped together. Fluorescents are popular because they produce a very wide spread of light output, which helps to evenly and uniformly illuminate the irregular surfaces of vehicles and thus better reveal imperfections in the surface to be coated. Fluorescent lamps are also popular because they can be had in a variety of color temperatures, w [...]
LED Lighting Development: The Future of Lighting is Now
Since LEDs first became viable as an effective general use luminary about ten years ago, improvements in LED technology have advanced at a rapid pace. Initially considered to produce too little output for general lighting applications and plagued by problems with color quality and high costs, LEDs have now reached the point of surpassing most common types of light sources in terms of efficiency and output as well as light quality. [...]
Choosing Spray Paint Booth Lighting and Booth Design
A poorly lit paint booth with weak ventilation will lead to poorly matched colors and lots of finishing work to deal with paint contaminants. So, it’s best to be realistic and have a few solid ideas of what you are looking for in a paint spray booth in order to ensure that your new booth is all asset and no liability. [...]
Paint Spray Booth Lighting Fundamentals
Of huge importance to paint spray booth applications is the safety regulation compliance of the lighting equipment and its suitability for use in a hazardous environment. Due to the flammable nature of the chemicals and compounds used within the booth, removing potential sources of ignition is critical. Since any electrical equipment used is a potential source of heat, sparks or flame, it must be properly designed and certified for use in hazardous locations. Paint spry booth lighting that is mo [...]
Combustible Dust Standards and Preemptive Safety
As of this writing, OSHA has yet to institute a solid set of standards for combustible dusts. Many officials adopt NFPA recommendations into their local fire codes as a result in order to attempt some level of regulatory standards across a broad spectrum. Whether or not any meaningful regulation emerges from OSHA in the near future, it is best that any industry or commercial operation associated with combustible dusts be preemptive and adhere to any local regulations as well as adopt their own m [...]
Effectively Lighting the Hazardous Enclosed Workspace
Confined space lighting must also provide the widest possible coverage of the workspace and be bright enough and of high enough quality to allow trouble free visual determinations. Colors need to be rendered correctly and light levels must be high enough to allow normal activity without the need for compensation through slowed operations and overly repetitive verifications. Other considerations for confided space lighting include keeping heat production to a minimum, hands free operation, durabi [...]
LED Fluorescent Tube Fixtures: Efficiency Beyond Lumens vs Watts
LEDs retain several distinct advantages over fluorescent lamps. LEDs do not require any ballast for their operation. Using entirely solid state electronics, the current and output of LEDs can be easily regulated and maintained. There is no initial startup or warm up period normally associated with ballast equipped luminaries. [...]
Infrared Light and CCD Based Digital Cameras
When most of us think of night vision devices we usually picture the elaborate electronic headgear or special cameras used by military personnel. We usually assume the technology is complicated and the price exorbitant and so we also assume that attractive as being able to see in the dark may be, its beyond the realm of us mere mortals. [...]
How Do You Know If a Light is really Explosion Proof?
Hazardous location lighting equipment is in the simplest explanation used in places where concentrations of volatile gases, flammable dust or particulates, or flammable chemicals are high enough to present a danger of ignition that can lead to explosion or fire. [...]
Spray Booth Lights: Which Type for Best Results?
Most paint spray booths utilize one of two types of lighting fixtures in their design, either fluorescent tubes, or high intensity discharge lamps. Incandescent lamps are poor choices for spray booth applications because they are highly inefficient, have very short life-spans, and produce copious amounts of heat during their operation. [...]
Confined Space Lighting for Hazardous Locations
Confined spaces represent some of the most dangerous work places in commercial industries. Because of their enclosed nature confined spaces are poorly ventilated and allow volatile gases, fumes, vapors, and particulates to accumulate and increase in atmospheric density to potentially explosive levels. Confined spaces represent a hazardous work area and are loosely defined by a few general characteristics. [...]