Links will open in new windows.
Explosion Proof Lights:
Our line of explosion proof lights and explosion
proof LED lights represent the best in high quality explosion proof
View More Information
We carry an extensived line of LED lights
including LED light bars, explosion proof LEDs, LED lights for military
applications, boats, vehicles, security lighting and more.
Infrared LED Lights:
Infrared LED light emitters for covert
applications. Larson Electronics Infrared LED emitters are ideal for military and
security applications where a covert source of infrared light is
View More Information
We carry the full line of Golight remote
controlled spotlights and related accessories. Larson Electronics is the only source for
the Golight Stryker Remote Control Spotlight with magnetic base.
View More Information
Larson Electronics stocks a comprehensive line of
hunting lights and related accessories. Our hunting lights include rechargeable
handheld LED spotlights and HID spotlights with red lenses.
View More Information
Our HML series of spotlights have been tested
and approved for use by the Marines, Army, Navy, and Air Force and are part of
the military’s Special Forces' Escalation of Force Kits.
View More Information
24 Volt Lights:
Larson Electronics manufactures and stocks an
extensive line of 24 volt
lighting equipment that ranges from 12/24 volt spotlights and floodlights to
multimillion candlepower searchlights and industrial grade work
View More Information
Magnalite or Larson Electronics
Larson Electronics is a
manufacturer and distributor of industrial-commercial grade lighting products.
Larson Electronics carries an extensive line of lighting products including explosion proof lights, hazardous location lights, explosion proof paint spray booth lights, high power LED lights, remote control HID Golight spotlights, LED flashlights,
military spotlights, infrared LEDs, LED
boat lights and industrial light towers. Larson Electronics also
manufactures and distributes a wide range of HID high power spotlights and HID flashlights that are ideal for
use as military spotlights
and law enforcement searchlights as well as effective for use in the utility and emergency services
Larson Electronics products that are
particularly well suited to military and law enforcement applications include
police lights, unity post mount spotlights, unity roof mount lights, remote control Golight spotlights, remote control spotlights with magnetic bases, rechargeable spotlights,
rechargeable flashlights, led flashlights, high
intensity discharge military spotlights with magnetic
bases and magnetic tripods for
flashlights and spotlights. Larson Electronics manufactures and carries an extensive
line of military spotlights, floodlights, and military
grade lighting accessories and equipment.
Many of Larson Electronicss lighting
products can serve equally well in the public and private sector as hunting spotlights, boating spotlights, camping lights,
off-road and ATV lights, and infared security lights; this includes a wide array of LED lights and LED light bars that
can operate on a variety of voltages ranging from 9 to 42 VDC and can be mounted
on cars, trucks, boats and
Larson Electronics is a large distributor
of the Golight line of remote controlled spotlights and stocks
a comprehensive variety of HID or high intensity discharge Golights, Golight marine spotlights and searchlights, Golight floodlights,
military Golights and
a wide array of camouflage Golights for hunting and
off-road use. Larson Electronics is the only source for the Golight Stryker Remote Control Spotlight with magnetic
base and offers a wide variety of mounting
options for both the Golight Stryker and
Golight RadioRay series of spotlights.
Larson Electronics develops and stocks a wide
range of explosion proof lights and products as well as intrinsically safe lights and
intrinsically safe LED lights. Larson Electronics’s explosion proof line of lights carry the required
explosion proof certifications and approvals and are U.L. certified for use in
hazardous locations according to their respective class, division and zone
ratings. Larson Electronicss hazardous location lighting includes explosion proof fluorescent lights
for paint spray booths, Class 1 Div 1 flashlights and intrinsically safe lights, portable and cart mounted tank lights, explosion proof droplights,
explosion proof LED lights and intrinsically safe flashlights.
Larson Electronics regularly develops and
manufactures new additions to its line of explosion proof lighting and industrial grade lighting products and is proud to offer the latest
in explosion proof LED lighting and explosion proof paint spray booth lighting. Larson Electronics also manufactures a wide array of military and
law enforcement related accessories including the concealable, back up universal handcuff key (plastic handcuff key)
used by Air Force pilots, Navy SPAWAR, Navy Seals and Special Operations
military personnel to effect escape in hostage or prisoner
can also call us toll free at 1-800-369-6671. Purchase orders
can be faxed to us at 903-498-3364 Larson Electronics can provide
detailed technical information regarding any of its products and is capable of
working with customers to create unique lighting solutions to suit their needs
If you have any questions or special
requirements regarding any of our industrial grade lighting solutions please
contact us by E-mail at
Larson Electronics manufactures the
Larson Electronics 12 volt spotlights with magnetic base and 12 volt searchlights with magnetic base with magnetic bases and 16 foot cords in Dallas, TX. These
industrial grade 12 volt spotlights
have been a staple of the cable, telephone and electric utility industry since
1967. Larson Electronics has since its beginnings expanded this to include the military/law enforcement
industries, federal and local governments, and emergency and first responder industries as well.
We carry a complete line of
HID off road and HID
equipment lights, including the Acro Light line.
HID flood lights with
permanent and magnetic mount options work on 12 and 24 volt DC systems and
provide illumination that extends 250 feet. The permanent mount and magnetic
mount HID spotlights project a beam to 3000 feet.
Larson Electronics is a
manufacturer and as such we maintain a large available inventory of our magnetic
mount spotlights, HID spotlights. HID flashlights and
the Golight Stryker and Golight Radioray remote controlled spotlights, battery
operated flashing strobe lights, LED flashlights and
LED headlamps. Because of our extensive inventory and "make to order" capacity,
nearly all orders for spotlights and flashlights received before 4 PM CT are
shipped same day via UPS.
Many of our professional grade
spotlights and flashlights make excellent gifts for him or gifts for men. Remote
controlled spotlights with magnetic base, military spotlights, handheld
spotlights, vehicle mount spotlights, rechargeable spotlights, rechargeable flashlights, hunting spotlights, hunting searchlights
and state of the art hid flashlights all
make fine christmas gifts for men, and are sure to please even the most
discriminating friends and family.
Larson Electronics' Larson Electronics can also
be viewed in these languages - Arabic Spanish Japanese Italian Portuguese Russian French.
Contact us at sales@magnalight
.com or call us toll free at 1-800-369-6671 for mor
information regarding any of our products. Purchase orders can be faxed to us at
903-498-3364 Larson Electronics can provide detailed technical
information regarding any of its products and is capable of working with
customers to create unique lighting solutions to suit their needs and
Larson Electronics Links
Follow Larson Electronics on
Explosion Proof LED Paint Spray Booth light - Class 1 Div 1 - Class 1 Div 2 - T6 - 7,000 Lumens
Part # EPL-48-2L-LED Price:
Hoja de Especificaciones
Made in the USA
The Larson Electronics EPL-48-2L-LED Explosion Proof LED Light Fixture is United States and Canada approved Class 1 Division 1 & 2 and Class 2 Division 1 and 2 for areas where flammable chemical/petrochemical vapors exist or have the potential to exist. This explosion proof LED light has a T6 temperature rating and carries a paint spray booth light certification, making it ideal for applications such as paint booths, oil rigs, offshore applications, petrochemical, manufacturing, chemical storage, water treatment centers, and food processing plants.
This four foot, two lamp LED fixture is ideal for operators seeking a top quality explosion proof light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The EPL-48-2L-LED is equipped with Larson Electronics’ specially designed LED T-series bulbs which produce 7,000 lumens, resulting in 30% more foot candles of illumination at 8 feet as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8's and have consistently surprised many of our customers with their unexpectedly high light output levels.
We now offer our second generation LED tube lamps with this fixture which have increased this hazardous location light’s performance. This two lamp explosion proof LED linear fixture is lighter in weight, has a slimmer profile, and produces more light than traditional explosion proof fluorescent fixtures. The four foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is over twice as long as standard T8 bulbs.
This fixture carries a T6 temperature rating and is approved for Class I Division 1, Groups C and D, Class I, Division 2, Group A, B, C and D, and Class II, Division 1 and 2, Groups E, F and G environments where flammable or combustible gases, vapors, dusts, fibers, and flying exist or stand the potential to exist. This LED linear fixture is approved for use in confined spaces. Click here to read the NEC description for explosion proof and hazardous locations.
We have eliminated the ballast box normally associated with explosion proof fluorescent fixtures which reduces overall weight and overall complexity of installation. There is no ballast in this unit and the included LEDT8-28W-V1 LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. These fluorescent LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white, 4500K natural white, and 3000K warm white. Our standard unit ships with 5600K unless different color temperature is specified.
Unlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.
The 28 watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. Each lamp produces 3,500 lumens at 125 lumens per watt, for a combined 7,000 total lumen light output. An EPL-48-2L-T8 explosion proof fluorescent light, with a combined total of 64 watts, draws 0.54 amps at 120 volts AC. This LED version of the same light, with a total of 56 watts, draws only 0.47 amps at 120 volts AC. The EPL-48-2L-LED is universal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50/60hz without any modifications. We also make a 12/24V AC/DC version for low voltage applications for AC or DC power.
|Energy Consumption Comparison|
|Wattage||108 watts||64 watts||56 watts|
|Amp Draw @ 120V AC||0.90 amps||0.54 amps||0.47 amps|
|Amp Draw @ 220V AC||0.49 amps||0.29 amps||0.25 amps|
|Amp Draw @ 240V AC||0.45 amps||0.27 amps||0.23 amps|
|Amp Draw @ 277V AC||0.39 amps||0.24 amps||0.20 amps|
|Amp Draw @ 12V DC||9 amps||5.34 amps||4.67 amps|
|Amp Draw @ 24V DC||4.5 amps||2.67 amps||2.34 amps|
|Lamp Life Expectancy||20,000 hours||24,000 hours ||50,000 hours|
|Operation cost per year|
(12hs/day @ 12c/kWh)
Our EPL-48-2L-LED LED light fixture is U.S. and Canada approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementations.
Mounting Options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations.
|Surface Mount (Standard) |
|Click Photo to Enlarge ||Click Photo to Enlarge ||Click Photo to Enlarge |
Adjustable Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.
|Pendant Mount (Optional) |
|Click Photo to Enlarge ||3 Conduit Positions ||Click Photo to Enlarge |
Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture.
Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, gas processing plants.
|Made in USA Quality||Superior LED Benefits|
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy
4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for re-lamping the fixture, while some competitive models require the “tap and knock off” method to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.
1. 50,000 hour lifespan.
2. Can SAVE 50% or more on energy.
3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.
4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LEED and other sustainable business certifications.
9. Bright, even light maintains consistent color over time.
10. Instant on/off – No flickering, delays or buzzing.
11. Very good color rendering.
12. Vibration/impact resistant.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.
|Specifications / Additional Information|
|EPL-48-2L-LED Explosion Proof LED Fixture ||Ratings/Approvals|
Scroll Down to Purchase-
|Listing: United States - Canada||Class 1 Division 1 & 2, Groups C and D |
|Dimensions: W-11.25" x L-52" x H-8.5 "||Class 2, Division 1 & 2, Groups E,F,G|
|Weight: 45 Lbs. ||UL 595 Marine Type (Saltwater)|
|Voltage: Universal 120-277VAC 50/60 Hz or 11-25V AC/DC||UL 844|
|Total Watts: 56 watts (28 Watts Per Lamp) ||UL 1598 Marine Type|
|Total Lumens: 7,000 (3,500 Per Lamp)||Certified Canadian Standards|
|LED Lamp Life Expectancy: 50,000+ Hours||Listed for Paint Spray Booths|
|Luminous Efficacy: 125 Lumens per Watt||California Title 24 Compliant|
|Color Temp: 5600K, 4500K, 3000K||IP67 Rated - Waterproof|
|Color Rendering Index: >80||T6 Temperature Rating|
|Beam Angle: 150°||NEMA 4X|
|Power Efficiency: 90%||LEL Listed LED Lamps|
|Power Factor: >0.95||Approved for Confined Spaces|
|Ambient Operating Temp Range:-30° C to +85°C||Silicone Free|
|Operating Temp Rating: T6 Rated||Factory Sealed Fixture|
|Minimum Operating Temp: -30°C||Made in the USA|
|Maximum Case Temp: +90°C|
|Housing Material: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free|
|Lens Material: Hardened Borosilicate Glass Tubes|
|Gasket Material: Buna Rubber O-Rings||Special Orders- Requirements|
|Mounting: Surface Standard - Pendant Optional||Contact us for special requirements|
|Wiring Hub: 1/2" NPT||Toll Free: 1-800-369-6671|
|Warranty: 5 Years*||Intl: 1-903-498-3363|
|U.L Approval: U.S Certificate Canada Certificate||E-mail: firstname.lastname@example.org|
| || |
Click here to view the Explosion Proof Light Design Description|
9.43 / 10
17988 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
How Much Light is Enough Light
Lighting choices vary, depending on the needs of the applicable location and personal preferences of individuals in the area. A “one size fits all” solution is rarely available when determining the lighting requirements of multiple environments. For example, lighting configurations for an office may differ, compared to a packaging warehouse. Even if the two facilities were the same size, the type of work being carried out in the buildings dictate the properties or characteristics [...]
Understanding Explosion Proof Lighting Classes Divisions and Groups
The concept of explosion proof light ratings can be confusing to understand. Hazardous workplace conditions can vary greatly and that means that a comprehensive rating system becomes necessary in order to ensure a safe work environment. [...]
Lumen vs Foot-Candles – Which Is More Accurate for Measuring Illumination?
When a customer is looking for lights, the most common question posed is “how bright is this light?” As lighting technology improves, the standard measurements of illumination aren’t always the most accurate in calculating a light’s output. Understanding how each rating is determined will help you choose the best fixture for an application. [...]
The Future of Lighting: No More Lamp Servicing or Maintenance?
While on the one hand we are seeing a shift towards an integrated LED lamp/fixture modality, there does exist the potential for a “modular” approach to LED manufacture. This sounds contradictory, but let us explain in a little more detail. While an integrated LED/fixture design is indeed the probable route of future lighting design, the actual totality of an LED based luminaire is based on a combination of several distinct parts or “modules”. LEDs themselves are only represented by the “chip”; t [...]
LED versus Fluorescent: Lumens per Watt is Only Part of the Story
Today it is commonplace to find T8 fixtures producing on the order of 80 to 100 lumens per watt of output, putting fluorescent lighting at the top of the efficient lighting ratings in terms of lumen per watt efficiency. However, this does not tell the whole story, and other factors come into play which affect the real world efficiency of fluorescent lighting and brings it a little more down to earth. [...]
Basics of Selecting Effective Paint Booth Lighting
The lighting of choice for most paint booths is standard four foot long fluorescent bulbs, usually arranged in fixtures containing either two or four bulbs grouped together. Fluorescents are popular because they produce a very wide spread of light output, which helps to evenly and uniformly illuminate the irregular surfaces of vehicles and thus better reveal imperfections in the surface to be coated. Fluorescent lamps are also popular because they can be had in a variety of color temperatures, w [...]
What is Explosion Proof Lighting?
At the basic level, explosion proof lighting is equipment designed to prevent the ignition of flammable or explosive materials, gases, or vapors. Lighting is one of the most commonly encountered electrical devices in any type of workplace and the types of lighting used can range from high power permanent fixtures to a common flashlight used for portable illumination. Every type of light used in a hazardous location must be explosion proof certified regardless of its size or type. Since lighting [...]
Explosion Proof Oil Rig Lights: Special Considerations for a Growing Industry
It is not enough to simply incorporate standard explosion proof and intrinsically safe lighting designs into rig illumination plans. The potential damage that corrosion and dampness can erode the integrity of explosion proof housings and fixtures must also be taken into consideration as well. As a result, explosion proof oil rig lighting must be specifically designed to meet marine use compliance as well as NEC, ATEX or IECex compliance if safe operation over long term use is to be ensured.
Fluorescents, LEDs and Color Rendering Index: More than Just Color Reproduction
The color rendering index is a scale devised some time ago to measure how colors may change in appearance when illuminated by a light source as compared to an accepted standard light source with the same color temperature. For example, a color chart with several different colors may be set up and illuminated with an incandescent lamp which is used as a standard reference. Then, the same color chart will be illuminated with a fluorescent lamp and any changes in how each of the colors appear are t [...]
LED Mine Lighting and Worker Safety
Utilizing controlled tests involving standard mining cap lights, common commercial grade LEDs, and a special LED mining light design of their own making, they found that for most intents and purposes, LEDs provided a greater degree of contrast and improved threat detection times as shown by test subjects. Particularly in the case of workers over the age of 40, with 43 years being the average age of mine workers, contrasting of LED illuminated objects was improved 43%. Additionally, threat detect [...]
Paint Booth Lights for Modern Paint Types
Paint manufacturers have taken these physical properties farther, and now use various pigments and materials to enhance the reflective or absorption properties of other materials to produce colors of exceptional intensity and hue. The problem for paint booth operators is obvious; with such complexities introduced into paint coloration and characteristics, being able to accurately match or reproduce colors is made more difficult. When light hitting an object does not contain a full spectrum of co [...]
IECex/ATEX and North American NEC HAZLOC Equipment Classification
North America is presently not operating with the IECex/ATEX schemes although some effort has been made to produce some homogenity between North American and European Standards, most notably the US and Canada's adoption of a Zone system (NEC 505) modeled after European Schemes. However, despite the great similarity between North American and European Zone systems, they are not identical and are not interchangeable.
Combustible Dust Standards and Preemptive Safety
As of this writing, OSHA has yet to institute a solid set of standards for combustible dusts. Many officials adopt NFPA recommendations into their local fire codes as a result in order to attempt some level of regulatory standards across a broad spectrum. Whether or not any meaningful regulation emerges from OSHA in the near future, it is best that any industry or commercial operation associated with combustible dusts be preemptive and adhere to any local regulations as well as adopt their own m [...]
LED Fluorescent Tube Fixtures: Efficiency Beyond Lumens vs Watts
LEDs retain several distinct advantages over fluorescent lamps. LEDs do not require any ballast for their operation. Using entirely solid state electronics, the current and output of LEDs can be easily regulated and maintained. There is no initial startup or warm up period normally associated with ballast equipped luminaries. [...]
Infrared Light and CCD Based Digital Cameras
When most of us think of night vision devices we usually picture the elaborate electronic headgear or special cameras used by military personnel. We usually assume the technology is complicated and the price exorbitant and so we also assume that attractive as being able to see in the dark may be, its beyond the realm of us mere mortals. [...]
How Do You Know If a Light is really Explosion Proof?
Hazardous location lighting equipment is in the simplest explanation used in places where concentrations of volatile gases, flammable dust or particulates, or flammable chemicals are high enough to present a danger of ignition that can lead to explosion or fire. [...]
Spray Booth Lights: Which Type for Best Results?
Most paint spray booths utilize one of two types of lighting fixtures in their design, either fluorescent tubes, or high intensity discharge lamps. Incandescent lamps are poor choices for spray booth applications because they are highly inefficient, have very short life-spans, and produce copious amounts of heat during their operation. [...]
The Future of Explosion Proof Lighting
Two of the biggest factors in the development and implementation of explosion proof lighting technology are economics and regulations. The standards and requirements regulating the design of explosion proof lighting as outlined by OSHA, the International Electrical Code and others dictate a high level of design strength and ignition resistance, and these in turn increase the costs associated with such equipment. [...]
Confined Space Lighting for Hazardous Locations
Confined spaces represent some of the most dangerous work places in commercial industries. Because of their enclosed nature confined spaces are poorly ventilated and allow volatile gases, fumes, vapors, and particulates to accumulate and increase in atmospheric density to potentially explosive levels. Confined spaces represent a hazardous work area and are loosely defined by a few general characteristics. [...]
“Explosion Proof”: Its Not Just a Label
Hazardous work areas are one of the most demanding environments for the workers and equipment that must operate within them. The often confined spaces combined with the presence of volatile materials presents a serious danger of fires and explosions that must be adequately addressed to insure the safety of workers and the public in both the work space and the surrounding area. [...]
Explosion Proof and Intrinsically Safe: There is a Difference
When it comes to explosion proof lighting many people have trouble understanding exactly what the term means. Factor in that there is also the term “intrinsically safe light” which is related to explosion proof lighting, and the fact that few people have had the benefit of a good layman explanation of the terms, and it becomes clear that there is plenty of room for confusion. [...]
Explosion Proof LEDs: Advanced Technology for Spray Booth Applications
One of the most critical aspects of a properly designed spray booth is the type of lighting to be used in its operation. For most applications, the number and size of the lights needed is determined by the size of the booth. The second most important consideration is the quality of the illumination provided by these lights. [...]
Explosion Proof Lights: Lessening the Danger in Hazardous Work Areas
Hazardous work areas present special challenges for the workers and businesses that must operate within them. These work areas are often confined rooms or containers like fuel tanks where vapors and gases from work activities can become concentrated to dangerous levels. As well as the obvious dangers posed by inhalation of these contaminants are the not so obvious dangers that can have lethal consequences if not properly addressed. [...]