Links will open in new windows.
Explosion Proof Lights:
Our line of explosion proof lights and explosion
proof LED lights represent the best in high quality explosion proof
View More Information
We carry an extensived line of LED lights
including LED light bars, explosion proof LEDs, LED lights for military
applications, boats, vehicles, security lighting and more.
Infrared LED Lights:
Infrared LED light emitters for covert
applications. Larson Electronics Infrared LED emitters are ideal for military and
security applications where a covert source of infrared light is
View More Information
We carry the full line of Golight remote
controlled spotlights and related accessories. Larson Electronics is the only source for
the Golight Stryker Remote Control Spotlight with magnetic base.
View More Information
Larson Electronics stocks a comprehensive line of
hunting lights and related accessories. Our hunting lights include rechargeable
handheld LED spotlights and HID spotlights with red lenses.
View More Information
Our HML series of spotlights have been tested
and approved for use by the Marines, Army, Navy, and Air Force and are part of
the military’s Special Forces' Escalation of Force Kits.
View More Information
24 Volt Lights:
Larson Electronics manufactures and stocks an
extensive line of 24 volt
lighting equipment that ranges from 12/24 volt spotlights and floodlights to
multimillion candlepower searchlights and industrial grade work
View More Information
Magnalite or Larson Electronics
Larson Electronics is a
manufacturer and distributor of industrial-commercial grade lighting products.
Larson Electronics carries an extensive line of lighting products including explosion proof lights, hazardous location lights, explosion proof paint spray booth lights, high power LED lights, remote control HID Golight spotlights, LED flashlights,
military spotlights, infrared LEDs, LED
boat lights and industrial light towers. Larson Electronics also
manufactures and distributes a wide range of HID high power spotlights and HID flashlights that are ideal for
use as military spotlights
and law enforcement searchlights as well as effective for use in the utility and emergency services
Larson Electronics products that are
particularly well suited to military and law enforcement applications include
police lights, unity post mount spotlights, unity roof mount lights, remote control Golight spotlights, remote control spotlights with magnetic bases, rechargeable spotlights,
rechargeable flashlights, led flashlights, high
intensity discharge military spotlights with magnetic
bases and magnetic tripods for
flashlights and spotlights. Larson Electronics manufactures and carries an extensive
line of military spotlights, floodlights, and military
grade lighting accessories and equipment.
Many of Larson Electronicss lighting
products can serve equally well in the public and private sector as hunting spotlights, boating spotlights, camping lights,
off-road and ATV lights, and infared security lights; this includes a wide array of LED lights and LED light bars that
can operate on a variety of voltages ranging from 9 to 42 VDC and can be mounted
on cars, trucks, boats and
Larson Electronics is a large distributor
of the Golight line of remote controlled spotlights and stocks
a comprehensive variety of HID or high intensity discharge Golights, Golight marine spotlights and searchlights, Golight floodlights,
military Golights and
a wide array of camouflage Golights for hunting and
off-road use. Larson Electronics is the only source for the Golight Stryker Remote Control Spotlight with magnetic
base and offers a wide variety of mounting
options for both the Golight Stryker and
Golight RadioRay series of spotlights.
Larson Electronics develops and stocks a wide
range of explosion proof lights and products as well as intrinsically safe lights and
intrinsically safe LED lights. Larson Electronics’s explosion proof line of lights carry the required
explosion proof certifications and approvals and are U.L. certified for use in
hazardous locations according to their respective class, division and zone
ratings. Larson Electronicss hazardous location lighting includes explosion proof fluorescent lights
for paint spray booths, Class 1 Div 1 flashlights and intrinsically safe lights, portable and cart mounted tank lights, explosion proof droplights,
explosion proof LED lights and intrinsically safe flashlights.
Larson Electronics regularly develops and
manufactures new additions to its line of explosion proof lighting and industrial grade lighting products and is proud to offer the latest
in explosion proof LED lighting and explosion proof paint spray booth lighting. Larson Electronics also manufactures a wide array of military and
law enforcement related accessories including the concealable, back up universal handcuff key (plastic handcuff key)
used by Air Force pilots, Navy SPAWAR, Navy Seals and Special Operations
military personnel to effect escape in hostage or prisoner
can also call us toll free at 1-800-369-6671. Purchase orders
can be faxed to us at 903-498-3364 Larson Electronics can provide
detailed technical information regarding any of its products and is capable of
working with customers to create unique lighting solutions to suit their needs
If you have any questions or special
requirements regarding any of our industrial grade lighting solutions please
contact us by E-mail at
Larson Electronics manufactures the
Larson Electronics 12 volt spotlights with magnetic base and 12 volt searchlights with magnetic base with magnetic bases and 16 foot cords in Dallas, TX. These
industrial grade 12 volt spotlights
have been a staple of the cable, telephone and electric utility industry since
1967. Larson Electronics has since its beginnings expanded this to include the military/law enforcement
industries, federal and local governments, and emergency and first responder industries as well.
We carry a complete line of
HID off road and HID
equipment lights, including the Acro Light line.
HID flood lights with
permanent and magnetic mount options work on 12 and 24 volt DC systems and
provide illumination that extends 250 feet. The permanent mount and magnetic
mount HID spotlights project a beam to 3000 feet.
Larson Electronics is a
manufacturer and as such we maintain a large available inventory of our magnetic
mount spotlights, HID spotlights. HID flashlights and
the Golight Stryker and Golight Radioray remote controlled spotlights, battery
operated flashing strobe lights, LED flashlights and
LED headlamps. Because of our extensive inventory and "make to order" capacity,
nearly all orders for spotlights and flashlights received before 4 PM CT are
shipped same day via UPS.
Many of our professional grade
spotlights and flashlights make excellent gifts for him or gifts for men. Remote
controlled spotlights with magnetic base, military spotlights, handheld
spotlights, vehicle mount spotlights, rechargeable spotlights, rechargeable flashlights, hunting spotlights, hunting searchlights
and state of the art hid flashlights all
make fine christmas gifts for men, and are sure to please even the most
discriminating friends and family.
Larson Electronics' Larson Electronics can also
be viewed in these languages - Arabic Spanish Japanese Italian Portuguese Russian French.
Contact us at sales@magnalight
.com or call us toll free at 1-800-369-6671 for mor
information regarding any of our products. Purchase orders can be faxed to us at
903-498-3364 Larson Electronics can provide detailed technical
information regarding any of its products and is capable of working with
customers to create unique lighting solutions to suit their needs and
Larson Electronics Links
Follow Larson Electronics on
Class 1 Division 1 Explosion Proof 100 Watt Ultraviolet LED Light Fixture - Paint Booths - 365NM
Part # EPL-HB-100LED-RT-UVA Price:
Hoja de Especificaciones
The Larson Electronics EPL-HB-100LED-RT-UVA Explosion Proof Ultraviolet light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries with UV cutoff filters. LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent, metal halide and high pressure sodium lights. This fixture uses advanced LED light technology to produce ultraviolet light and is T6 rated for hazardous locations where UV lamps are used in paint and adhesive curing, food inspection or for non-destructive testing.
This Class 1 Division 1 & 2, Class 2 Division 1 & 2 explosion proof UV light fixture provides 35,000 mW of high quality ultraviolet light while drawing only 100 watts. This high output UV LED fixture provides a 4,800 µW/cm2 center beam maximum intensity at 12" while providing a minimum 2,000 µW/cm2 intensity over a 14" by 14" area. The EPL-HB-100LED-RT-UVA is typically used for curing coatings or adhesives and for non-destructive testing applications. This fixture has been thoroughly tested with the DuPont line of ultraviolet curable paint and primers, accelerating the cure times over metal halide fixtures with surface temperatures as low at 55°F.
The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 50,000 hour rated lifespan with 80% intensity retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. This fixture can operate on voltages ranging from 120V-277V 50/60Hz and is ETL approved for use in hazardous environments, paint spray booths, wet environments, and areas where UV lamps are used in paint and adhesive curing, food inspection, and for non-destructive testing.
|Click Photo to Enlarge||Click Photo to Enlarge||Click Photo to Enlarge|
| || |
The explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.
The EPL-HB-100LED-RT-UVA uses ultraviolet LED light technology, a technology that is far better in energy saving than traditional fluorescent bulbs used for the same purposes. Traditional ultraviolet lights require a coating to block out visible light or a special composition of gases and chemicals used to create a higher concentration of ultraviolet light. This process, however, also produces many other wavelengths of light which go unused and end up as wasted energy. LED lights are unique in that they have a narrower wavelength band than traditional ultraviolet sources and therefore do not require these special coatings. As a result, LED lights do not produce unused, wasted light and therefore consume less energy than traditional UV lights on the market. LED lights have the added benefit of being capable of producing very specific wavelengths with tighter curves and are more durable and light weight as well. This eliminates harmful UV-B and UV-C wavelengths from being emitted from the light source, adding in productivity and safety during operation.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-Striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
|400W MH||100W LED|
|Wattage||400 watts||100 watts|
|Amp Draw @ 120V AC||3.34 amps||0.84 amps|
|Amp Draw @ 24V DC||16.67 amps||4.17 amps|
|Lamp Life Expectancy||15,000||50,000+ Hours|
|Operation Cost per Year (8hs/day @ 11c/kWh)||$138.12||$32.12|
The Class 1 & 2, Division 1 & 2 LED ultraviolet light fixture can be used for non-destructive testing in aviation and manufacturing, food processing and inspection, and in paint, coating, and adhesive curing. The EPL-HB-100LED-RT-UVA provides operators in hazardous locations with a reliable and durable UV lighting solution that combines effective production of UV light with explosion proof protection and is applicable for leak detection, paint spray booths, ink, coatings, and adhesive curing, non-destructive testing, inspection, and food processing.
This light is universal voltage capable and can be operated with 100-277 VAC, 50/60Hz. We also offer a low voltage version of this LED fixture that operates on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.
|Click Photo to Enlarge|
This LED light produces 35,000 mW with a wavelength curve of 350-380NM. The EPL-HB-100LED-RT-UVA offers several mounting options including ceiling mounting, pendant mounting, wall mounting and cable mounting. The standard version of this explosion proof LED fixture includes a pendant mount and a surface mount option.
|High Quality Features||Superior LED Benefits|
1. Low power consumption.
2. Instant on/off operation.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.
4. Superior color rendering compared to HPS, LPS, MH.
5. Retains 80% intensity output after 50,000 operating hours.
6. Powder coated aluminum fixture body.
7. Pendant and Swivel Bracket mount included
8. Low profile - Light weight
9. 35,000 mW output from 100 watts.
10. 4,800 µW/cm2 center beam maximum intensity & minumum 2,000 µW/cm2 intensity covering a 14" x 14" area when measured at 12".
1. 50,000 hour lifespan.
2. Can SAVE 50% or more on energy.
3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.
4. Reduces energy use and prolongs life-Spans of peripheral cooling units (A/C, refrigeration)
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LED and other sustainable business certifications.
9. Bright, even light maintains consistent color over time.
10. Instant on/off – No flickering, delays or buzzing.
11. Very good color rendering.
12. Vibration/impact resistant.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.
|Specifications / Additional Information |
|EPL-HB-100LED-RT-UVA - C1D1 Ultraviolet LED Light||Ratings/Approvals|
Scroll Down to Purchase-
|Lamp Type: LED||Class 1 Division 1, Groups C and D|
|Dimensions: 14"-H x 16"-W 5"-D||Class 1 Division 2, Groups A,B,C,D|
|Total Watts: 100W||Class 2, Divisions 1 & 2, Groups E,F,G|
|Total Intensity: 35,000 mW||Class 3, Divisions 1 & 2|
|Efficiency: 350 mW/w||T5 Temperature Rating|
|Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC||Certified to UL844 and C22.2 Standards|
|Mounting: 3/4” Pendant and Swivel Mount are both included with this fixture.||Paint Spray Booth Approved|
|Weight: 28lbs||LEL Approved|
|Lighting Configuration: Flood Pattern||IP67 Rated Waterproof|
|Temp Rating: T5 -50C to +65C||Multiple Driver Banks|
|Color: Ultraviolet- 365NM||80% Intensity Retention after 50,000 Hours|
|Wavelength Curve: 350-400NM - Peak @ 365NM|| |
|Lamp Life: 50,000+ Hours|| |
|LED Driver Specs|| |
|Input Voltage: 100-277 Volts AC or 11-25 Volts AC/DC|| |
|Input Current: 1.8A Max||Special Orders- Requirements|
|Power Factor: 0.992||Contact us for special requirements|
|Output Voltage: 54V Max||Toll Free: 1-800-369-6671|
|Output Current: 2.1A||Intl: 1-903-498-3363|
|Warranty: Yes - 5 Year - 10 Year Warranty Available||E-mail: firstname.lastname@example.org|
| || |
9.43 / 10
18800 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|